Fiberglass reinforced polyester sheet.Bright and clean appearance.light weight.high ransmittance,anti-corrosion,anti-ageing.
Skylite301 frp sheet
Mechanics Features: High steel and high tenacity.
Resin Ingredient: Advanced benzene-----new neopentyl glycol anti-ageing DTM-1 resin.
Fiber Intensity: Non-alkali, non-twist, non-glue glass fiber.
Surface Treatment: Surface applying Morplated anti-ageing glue and pastes Melinex 301.
Reinforced Bending Line: Tensile reinforced line with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding)
Glass Fiber: Adopting Taian high- quality glass fiber, the content no less than 30%.
Unit Weight: 1800g/m² 2400g/m² 3050g/m²
Nominal Thickness: 1.2mm 1.5mm 2.0mm
Heat Resistance Limit: -60 to +130
Light Transmittance: 75%±2% ( light green) 53%±2% (cream white)
Anti- ultraviolet Rate: 99.9%
Tensile Strength: 100Mpa
Flexural Strength: 180Mpa
Cracking Elongation Rate: 1.9%
Barcol Hardness: ≥50
Thermal Expansion Coefficient: 2.2×10¯5cm/cm/
Thermal Conductivity: 0.18w/m° k
Warranty:15 years
The Technical Parameters of FRP Sheet.
- Goodtenacity. No cracking phenomenon when driving nails in roof installation
- Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate.
- Transmittance loss rate is low. No yellowing phenomenon after long term service.
- Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
- Light through FRP sheet assumes scattering shape and gentle.
- Bright and clean appearance, no distinct air bubble and cracking on FRP sheet.
- Anti- ultraviolet and anti- chemistry corrosion.
- Anti- ageing and anti- pulverization.
- Long service life.
