Technical parameters (Models not with the below parameter could be customized)
---Maximum Range: 5 ~ 500m
---Detection accuracy: ± 0.5% (20 ℃ water standards based on plane)
---Blind spot detection: ≤ 5% ~ 2% F.S (atF0 ~ FS)
---Wave beam angle: 18 ± 2
---Operating frequency: 50 kHz ~ 200 kHz (based on matching sensor dependent)
---Output signal: RS485, 4 ~ 20mA
---Instrument operating parameters:
---Display: LCD multi-information display + backlight, depth four-digit
---Display resolution: d = 1mm/1cm (user settings)
---Keyboard: five touch of a button
---Operating temperature: 0 ℃ ~ 50 ℃; Storage temperature: - 20 ℃ ~ 70 ℃
---Humidity: ≤ 80% RH non-condensing (meters)
---Storage humidity: ≤ 70% RH non-condensing (meters)
---Dimensions: 235 × 115 × 70mm
---Operating voltage: Built-in rechargeable lithium battery, standby time of about 6 hours intermittent
---Sensor operating parameters:
---Application of media: fresh water, sea water (determined when ordering); Operating temperature: 0 ℃ ~ 40 ℃
---Draft depth: ≥ 500mm
---Sensor lead: 10m
---Protection level: IP68
---Weight: Net weight ≤ 2.5Kg, packaging gross weight ≤ 3Kg
---Packing size: 27 × 12.5 × 21Cm
---Installation: Portable hand-held instrument; 1 inch threaded sensor installation.
---Dedicated charger: Input voltage: 110 ~ 240VAC 50/60Hz
---Output voltage: 12.6VDC 350mA
The standard instrument configuration: 1. Sensor 2 hand-held instrument 3. Dedicated charger
Can be selected a variety of portable protective case when you ordering.
