Rubber Conveyor Belt Jointing Machine,Belt Repair Machine(Xincheng,China)No.1 Introduction:Electrical Conveyor Belt Vulcanizers (or vulcanizing press, hot vulcanizer machine) are special equipments for belt joint in conveyer machine field. The machine is made by light aluminum alloy materials, and with small bulk, light weight, ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 MPa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable. It's reliable and convenient to operate. At the same time, it has the merits of fast warming, uniform temperature, high thermal efficiency, etc. It is ideal belt joint equipment for rubber conveyor belt in the conveyor machine field.
The quality of the belt joint will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, CGLHJ vulcanizer is the necessary auxiliary equipment for belt conveyer.     
No.2 Purposes:
The vulcanizers are widely used in vulcanizing and belt joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry, etc, where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
No.3 Technical Parameters:
1. Vulcanization pressure: 1.0-2.0Mpa;2. Vulcanization temperature: 145 ℃;3. Difference in surface temperature of vulcanized plate: ± 5 ℃;4. Calefactive time (at normal temperature to 145 ℃): ≤30 mins;5. Power supply voltage: 220V to 660 v;  50/60 Hz; 3Ph;6. Output power of Electronic Control Box: 36 KW;7. Temperature adjustment range: 0 to 200 ℃;8. Timing adjustment range: 0 to 99 min;9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm.