Product Description
SCA131HD is a scaler designed for multi-signals processing.Signals of composite video,YPbPr/YcbCr,S -video,VGA and HDMI can be scaled to be high resolution VGA/DVI/HDMI format and switched out.New generation has added HDMI in/out,more suitable to the increasting AV market where high resolution signal prevails.
Inputs:
1 channel of audio input on microphone connector in the front panel
8 s of audio via 8x5 pole outside lockable connector
2 channels of composite video on RCA connnectors
2 channels of component video on S-video
2 channels of component video on YPbPr/YcbCr
2channels of computer signal on VGA connectors
4 channels of HD singnal on HDMI connectors
Outputs:
1 channel of audio output with 2 RCA connector for stereo
1 channel of VGA output
1 channel of HDMI/DVI output
◆ LCD Display: Real-time monitor of the operating status
◆ Control mode: RS - 232, infrared, panel control
◆ Compatible with composite video, S-video, component video, VGA, HDMI, and/or balanced/unbalanced stereo audio
◆ Compatible with NTSC 3.58, NTSC 4.43, PAL and SECAM video
◆ Resolution: support 480P, 720P, 1080i, 1080p, and XGA, SXGA, SXGA+, WXGA
◆ Adjustable luminance, contrast and chroma etc.
◆ Higher resolution output signal with integrated double liner
◆ Adopting the gain-compensation and synchronization signal proofread technology
◆ Power-fail protection
◆ Rack-mountable enclosure
◆ Dimension: 483L x 230W x 44H (mm)
◆ Weight: 1.9kg
Video
◆Gain:0 dB
◆Bandwidth:AV :150MHz， S-Video:150MHz, VGA:375 MHz，HDMI/DVI:2.25Gbps
◆ Input Multi-channel vs.single channel crosstalk:-50dB @50 MHz， -45dB @10 MHz
◆Differential Phase I/OS:<1.28°,3.58 MHz
◆Differential Phase Error: 0.1°, 3.58-4.43 MHz
◆Differential Gain Error Time:0.1%, 3.58-4.43 MHz
◆Switching Speed:100 ns (Longest Time)
◆Signal Type:VGA，S-video， COMP Component Video(YPbPr/YCbCr)，Composite Video（CVBS），HDMI/DVI
Video Input
◆Signal Strength:1V p-p:Y Component Video, S-Video，Composite Video；
◆ 0.7V p-p： VGA（Computer Signal）；
◆ 0.3V p-p： Component Video、 S-Video，HDMI/DVI video
◆Min/Max Level:Analogue Signal-2V/+2V
◆Impedance:75 Ω
◆ Return Loss:<-30dB@5MHz
◆Horizontal Frequency Response:30-200KHZ
◆ Vertical Frequency Response:20Hz-240Hz
VGA Video Output
◆Interface:15-pin HD Female Connector
◆Min/Max Level:-2.0V / +2.0V
◆ Impedance:75 Ω
◆Return Loss:<-40dB@5MHz
◆ DC Offset:Max ±5mV
VGA Sync Signal
◆Input/Output Signal Type:RGBHV, RGBS, RGsB, RsGsBs, Composite Video, Component Video
◆ Video System:NTSC 3.58，NTSC 4.43，PAL，SECAM
◆ Input Level:0.5V- 5.0V p-p,: 4.0V p-p Normal
◆ Output Level:AGC-TTL: 5Vp-p, unterminated
◆ Input Impedance:510 Ω
◆ Output Impedance:75 Ω
◆ Max Transfer Delay:Horizontal :90ns Vertical:160ns
◆ Max Ascend/Descend Time:4ns
◆ Polar:Positive or Negative（Fully the same as input）
HDMI Video Input
◆ Protocol Supported:HDMI1.3a, DVI1.0, HDCP1.3, x.v.Color, TrueHD, DTS-HD
◆ PIXEL Bandwidth:165MHz, Full Digital
◆ Interface Bandwidth:2.25Gbps
◆ Max Resolution:HDPC 1600x1200@60_24bit Color Depth
◆ HDTV 1920x1080P@60_24bit Color Depth
◆ Clock Jitter:<0.15 Tbit
◆ Rise time:<0.3Tbit (20%--80%)
◆ Fall time:<0.3Tbit (20%--80%)
◆ Signal Type:HDMI / DVI-D full digital T.M.D.S. signal in HDMI 1.3a / DVI 1.0 Specification
◆ Interface:HDMI-A Interface (Type A connector )
◆ Signal Strength:T.M.D.S. +/- 0.4Vpp
◆ Min/Max Level:T.M.D.S. 2.9V/3.3V
◆ Impedance:50 Ω
◆ Input EDID:Use System Default EDID,( Support Terminal EDID mapping to input terminal)
◆ Max. DC Bias Error:15mV
◆ Max Input Distance Recommended:Less than 25m, at 1920x1080p@60 (Recommended to use special HDMI wire ◆ with authentication, like Molex TM)
HDMI Video Output
◆ Interface:HDMI-A Interface(Type A connector )
◆ Min/Max Level:T.M.D.S. 2.9V/3.3V
◆ Impedance:50 Ω
◆ Max Input Distance Recommended:Less than 10m, at 1920x1080p@60 (Recommended to use special HDMI wire ◆ with authentication, like Molex TM)
Audio Signal
◆ Input/output Interface:8-way 5pin Phoenix Connector / each way is with imbalanced audio input. 1-way 2RCA ◆ connector imbalanced output.
◆ Gain:0 dB
◆ Frequency Response:20 Hz ~ 20 kHz,
◆ THD + Noise:0.05% @ 1 kHz （Rated Voltage）
◆ Signal to Noise Ratio(S/N?):>58dB
◆ Stereo Channel Crosstalk:>80dB @ 1 kHz
◆ Common-Mode Rejection Ratio（CMRR）:>75dB @: 20 Hz ~ 20 kHz
◆ Signal Type:Stereo (Imbalanced Connecting Audio)
◆ Impedance:Input：>10 kΩ（Balanced or Imbalanced Connection）
◆ Output：50 Ω （Imbalanced Connection）, 100 Ω（ Balanced Connection）
◆ Max Input Level:+19.5dBu, （Balanced or Imbalanced Connection）
◆ Gain Error:±0.1dB @20 Hz ~ 20 kHz
◆ Max Output Level:+19.5dBu, （Balanced or Imbalanced Connection）
MIC
◆ MIC Type:Moving-coil Response
◆ Input Sensitivity :25mV
◆ Band Response:50Hz-16K Hz
◆ Interface Type:Mono Input
Control Port
◆ Serial Control Interface:RS-232, 9-pin Female D type interface
◆ Baud Rate and Protocol:Baud Rate：9600, Data Bit, Stop Bit：1, No Parity Bit
◆ Structure of Serial Control Interface:2 = TX, 3 = RX, 5 = GND
Specification
◆ Power:100VAC-240VAC～50/60 Hz, International Self-adapted Power
◆ Temp:Storage and in use: -20°～ +70°C
◆ Humidity:Storage and in use: 10% ～90%
◆ Case Dimension:483(L)X230(W)X44mm(H)
◆ Weight:1.9kg
◆ Average Failure Interval:30,000 Hours
◆ Warranty:1 year free repair, and life-time maintenance
