Method of configuring card

1. Configurating management card: Use a card to touch a empty lock probe. After hearing a long sound “tick”, the first card is management card.

2. Configuring manager card, waiter card, and guest card: use the configured management card to touch probe, hearing a long sound “tick”, and the LED of probe is flashing, use manager card, waiter card, or guest card to touch probe. The method is applicable to configure kinds of cards.

3. To delete card and complement card

If lose management card, manager card, waiter card or guest card, users can adopt following methods:

Management card: must use the company's management card to configure the new card again. First, initialize (namely, to empty) the lock, then follow the above management card configuring method. Two methods: 1) to uncover lock body and press the black button 5 seconds (the same as above ways of lock initialization).

2) To use my companyclearing card and waiter card or guest card to empty .

Manager card: use the management card to touch lock probe one time, and use new manager card to touch probe one time, configured card is the lock manager card.

Waiter card: use the management card to touch the lock probe one time, and use new waiter card to touch probe one time, configured card is the lock waiter card. Two long sounds “di – di” and the lock automatically converts into a single card. If still need double cards, use the lock management card to configure waiter card.

The method is the same as the original installation of the waiter card.

Guest card: use the management card to touch lock probe one time, and use new card to touch probe one time, configured card is the lock guest card

Note: the above mentioned clearing card can achieve its function without configuring card, and all cards be configured during probe light is flasing.