Product Description
KTS International (HK) Ltd.
Silver plastic products is currently as follows:
High thermal conductivity Series: KM1901HK
The thermal conductivity Series: KM1612HK-JS KM1712HK-JSW
Low thermal conductivity Series: KM1012HK-JS
KTS is a Hong Kong company KM1012HK with electrical and thermal conductivity of the solid crystal plastic, one-component, medium viscosity, low temperature storage for a long time, easy to operate and it is designed for small parts and small power LED on the bond for a fixed chip applications development and design of new products. The product distribution and bonding of large components with a longer period of time when the anti-evaporation, drying-resistant ability, and prevent the resin prior to processing splash spill, other brands with the same type of Ag-doped compared to adhesives, KM1012HK series in low temperature storage and transport.
October 15, 2011 to upgrade the product parameters
Product features: a high thermal conductivity: thermal conductivity as high as 5.0W/mk
Low resistance: resistance as low as 4μcm
Alternative solder
Room temperature transport - need to ice cold storage
Good liquidity
Good effect by the thrust
Should be used:
The silver plastic used in the recommended low-power devices, such as:
Low-power LED chip package
Low-power semiconductor
Light-emitting diodes
Membrane switch
Touch Screen
GaAs
Monolithic microwave integrated circuits
Replace solder
Product specific parameters:
Before curing
The appearance of silver
Viscosity range of 35000-48000cp
65% silver content
Ion content of Cl-, Na + were ≤ 0.8ppm
Tg 175 ℃
After curing
Thermal expansion coefficient α1 = 36.9 μ; m / m ● ℃
Thermal conductivity of 5.0W / m ● ℃
Volume resistivity of 4.0 (x10-5Ω ● cm)
Use
Curing temperature of 150 ℃
Curing time 5-10min
Shear strength greater than 8900psi
Hardness of 80
Impact strength greater than 10KG/7000psi
Instantaneous high temperature 260 ℃
Decomposition temperature of 380 ℃
Storage period 0 ℃ 3 months -15 ℃ 6 months
With increasing temperature, the shorter the curing time can be selected according to the actual situation, the recommended temperature of 150 ℃, 10min curing;
Note:
(1) cold storage, use glue to wake up to room temperature before 25 ℃, 2 hours later before use (-15 ℃ - 0 ℃ under refrigeration), boxed please stirring;
Operating time at room temperature up to 36 hours;
(2) to fully cure, there would be off-chip phenomenon.
(3) After the glue is not used, should be sealed refrigeration, or viscosity, larger, re-use when drawing the phenomenon may occur.
(4) can not be mixed with different adhesive types.
If you need more product information, please feel free to contact us.
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
