Home > Products > Industrial Supplies > Mining Machine

High Pressure Suspension Grinding Mill Features:

1.Compared with other pulverizers under the same power conditions,the output of this machine is increased by 20-30%.Under the performance of highpressure springs,the rollers grinding pressure on raw mateaials is raised by 800-1200kg.

2.All the mineral materials with Mohs hardness below 9.3 can be crushed.

3.The finished powder has a wide range of particle size from the maximum particle diameter of 0.613 mm(30 mesh)to the finest diameter of 0.013 mm(1000 mesh),While the normal particle diameter is around 0.033mm(425 mesh).

4.Its dust-removing effect exactly meets the National Dust Discharge Standard.

5.The classifier is easy for adjustment.

6.The grinding unit adopts a superposition multi-grade sealing with good sealing performance.

High Pressure Suspension Grinding Mill Operating principle:
In the main frame,a 1000-1500kg high pressure spring is fixed to the roller suspender.After the grinder is put into effect,the roller will circumgyrate around the main shaft,and rolls chosely against the grinding ring effected by the high pressure is 1.2 degree than Raymond mill.
When the stuff is loaded into the grinding cavity,it is shoveled into the space between the roller and the ring for grinding.The grinded powder goes into classifier along wiht the circulation wind of the blower and the standard finenesspowder is guided to the cyclone collector as finished and lager size stuff falls back to the grinder for regrinding.The circulation wind returns to the blower to repeat the above process and the after wind enters into bag dust cleaner for purification.