screw compressor
1.FAD:12m3/min
2. pressure:10bar
3.Motor:75KW
4.screw type,
screw compressor
Fully automatic load and unload. Compressor will start automatically and shut down under the following conditions:
- When the target pressure in the air tank has been reached
- When the voltage drops below a thrashold
- In an over-pressure condition
- When the temperature reaches a protection setpoint
High-quality European technology and components (GHH-Rand and SKF)
M-H air filter with long-life capability.(4000 hours+), easy for maintenance and replacement.
M-H oil filter, filtration density 10 micron (99.9% efficiency) and long-life capability (4000 hours+).
M-H air-oil separator, particle count below 3 ppm
Control system: All parts are by Schneider in France
Specification of screw air compressor:
|
Model
|
Capacity/pressure
M3/min/Mpa
|
Compre
ssing stage
|
Tem of
delivery
|
Power
(V/ph/Hz)
|
Motor
(kw)
|
Start
method
|
Dia. of hole
|
Drive
|
|
KB-40A
|
5.2/0.7
|
One
Stage
|
Air cooling:
<surroun
dings +15°C
|
380/3/50
|
30
|
|
G1.25”
|
Belt
drive
|
|
5.01/0.8
|
G1.25”
|
|
4.52/1.0
|
G1.25”
|
|
3.83/1.2
|
G1.25”
|
|
KB-50A
|
6.82/0.7
|
37
|
G1.5”
|
|
6.24/0.8
|
G1.5”
|
|
5.74/1.0
|
G1.5”
|
|
4.93/1.2
|
G1.5”
|
|
KB-60A
|
7.42/0.7
|
45
|
G1.5”
|
|
7.11/0.8
|
G1.5”
|
|
6.22/1.0
|
G1.5”
|
|
5.65/1.2
|
G1.5”
|
|
KB-75A
|
10.83/0.7
|
55
|
G2”
|
|
9.2/0.8
|
G2”
|
|
8.61/1.0
|
G2”
|
|
7.71/1.2
|
G2”
|
|
KB-100A
|
14.11/0.7
|
75
|
G2”
|
|
13.02/0.8
|
G2”
|
|
12.04/1.0
|
G2”
|
|
10.06/1.2
|
G2”
|
screw compressor
Fully automatic load and unload. Compressor will start automatically and shut down under the following conditions:
- When the target pressure in the air tank has been reached
- When the voltage drops below a thrashold
- In an over-pressure condition
- When the temperature reaches a protection setpoint
High-quality European technology and components (GHH-Rand and SKF)
M-H air filter with long-life capability.(4000 hours+), easy for maintenance and replacement.
M-H oil filter, filtration density 10 micron (99.9% efficiency) and long-life capability (4000 hours+).
M-H air-oil separator, particle count below 3 ppm
Control system: All parts are by Schneider in France
Specification of screw air compressor:
|
Model
|
Capacity/pressure
M3/min/Mpa
|
Compre
ssing stage
|
Tem of
delivery
|
Power
(V/ph/Hz)
|
Motor
(kw)
|
Start
method
|
Dia. of hole
|
Drive
|
|
KB-40A
|
5.2/0.7
|
One
Stage
|
Air cooling:
<surroun
dings +15°C
|
380/3/50
|
30
|
click for larger image
Img 1
Img 2
Img 3
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,