| Product Description |
1.Products Main Features:
| |
| |
Product Name
|
YS-C20U RF module |
|
Specifications
|
10mW output, 433/450/868/915MHz |
|
Brief Introduction
|
Power: 10mW output Distance: 0.5km Used name: YS-1020U |
* Carrier frequency: 433 MHz, 450MHz,868MHz, 915MHz or ISM others;
* Provide rich interface: RS-232/ TTL/ RS-485;
* 8 channels, expandable for 16/32 channels according to requirements of customers;
* Baud rate: 1200/2400/4800/9600/19200bps;
* Interface format: 8N1/8E1 user-defined, or customization for other format interface;
* Integration of receiving and transmitting and half duplex;
* Low power consumption and sleep function;
* Temperature: -35~+75 C ;
* Impedance: 50 Ohm(SMA antenna port, multiple antenna options available);
* Complying with EN 300220 and ARIB STD-T67.
2.Application areas:
* Automatic meter reading (AMR) and home automation
* Supervisory control and data acquisition (SCADA)
* Remote control,industry data collection;
* Monitoring of remote systems
* Production reporting of active systems
* Sports training & competition;
* Wireless POS, PAD wireless smart terminal;
* Electronic bus station and intelligent traffic;
* Point to multi-point wireless network, Industrial wireless remote control.
3.Specifications
* Power supply: DC 5v or 3.3V;
* RF power: 10mW;
* Receiving current: <25mA;
* Transmitting current: <40mA;
* Sleep current: <20uA;
* Size: 47mm*26mm*10mm (without antenna port ).
*Transmission distance:
500m (BER=10-3@9600bps);
800m (BER=10-3@1200bps);
4. Installation dimension:
5. Interface definition:
|
Pin
|
Pin name
|
Description
|
Level
|
Remands
|
|
1
|
GND
|
Grounding of power supply
|
|
|
|
2
|
Vcc
|
Power supply DC
|
+3.3~5.5V
|
|
|
3
|
RXD/TTL
|
Serial data receiving end
|
TTL
|
|
|
4
|
TXD/TTL
|
Serial data transmitting end
|
TTL
|
|
5
|
DGND
|
Digital grounding
|
|
|
|
6
|
A(TXD)
|
A of RS-485 or TXD of RS-232
|
|
|
|
7
|
B(RXD)
|
B of RS-485, RXD of RS-232
|
|
|
8
|
SLEEP
|
Sleep control (input)
|
TTL
|
Low level sleep
|
|
9
|
RESET
|
Reset (input)
|
TTL
|
Negative impulse reset
|
6. Setting of channel, interface, and data format:
The user can change or view interface baud rate, channel and address code. Parameter setting or reading as per the testing software "SPRG.EXE"in the CD (for free) come with the products.
|
Channel
|
Frequency
|
Channel
|
Frequency
|
Channel
|
Frequency
|
Channel
|
Frequency
|
|
1
|
429.0325MHZ
|
2
|
430.0325MHZ
|
3
|
431.0325MHZ
|
4
|
432.0325MHZ
|
|
5
|
433.0325MHZ
|
6
|
434.0325MHZ
|
7
|
435.0325MHZ
|
8
|
436.0325MHZ
|
NOTE: Generally the module in receiving state, if the IDLE pin continuously connect low level (>200millisecond), the module will be in sleep state, at the same time the module can not receive or transmit any data, only when the IDLE pin hang or in the state of high level (VH<3.5V), the module can be in receiving state again.
|
|
click for larger image
Img 1
Img 2
Img 3
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
