Highlights:
- This GSM Wirelss alarm system adopts SMS data message and voice platform of GSM network to send control command and receive alarm remotely.
- The system can be set delayed-arm.
- When a signal is detected by dedectors, the detector will send alrm signal to host immediately, and the host will send SMS alert message to pre-set mobile phone numbers automatically and drive wiretap.
- In addition, user can dial the system and set it in arm/disarm mode by any phone.
Specifications:
- Using micro-computer to operate the alarm system, it can prevent theft, detect gas leakage, smoke fire
- GSM Control Wireless Intelligent Security and Protection Alarm System, 3-Relay Outputs
- 11 zones guarding: 2 wired zones and 12 wireless zones
- GSM Wireless remote control to activate/deactivate through GSM mobile phone system
- The micro-computer auto calling reporting system can programmed a maximum of three (3) telephone numbers it can be to a mobile phone or fixed line phone
- The micro-computer auto sending SMS alart message to programmed a maximum of three (3) mobile phone numbers
- The host automatically stores system status, while its power is off
- The system equips backup rechargeable battery power in case of external power off
- Report the guarding zones by SMS or voice and monitor the voice at the site remotely
- Remote arm/disarm, and set the host by wireless keyboard, SMS or any phones
- Connector with the alarm center through GSM network
- Each zone has independent arm/disarm function
- 3 relay outputs to control your home appliances
- Works with external microphone
- Works with external speaker
- Pre-record a voice message in the system and playback when system is alarmed
- System password protection
- GSM weak signal reminder
- External power failure or line cut off alarm function
- GSM network frequency: 850MHz/1900MHz or 900MHz/1800MHz
- Alarm response time: less than 10 seconds (GSM in normality)
- Remote control panel
- LED indicators
- GSM SIM card and Phone line in sockets
- Siren: more than 110dB loud alarm
- Power input socket
- AC/DC adapter included: AC 100V - 240V 1A, DC 9V 2A
- Standby battery: DV 7.4V, 800mAH
- Standby battery working time: more than 10 hours
- Relay contact output 3: 3A, 120VAC; 3A 24VDC
- Accessories: 1 x Remote control panel, 2 x remote controllers, 1 x Wireless infrared detector, 1 x Wireless magnetic door/window entry detector, 1 x Siren, 1 x hanging bracket, 1 x AC/DC adapter, User manual
- In retail packaging
- Wireless Infrared Detector:
- Wide-range PIR detector
- The time delay of setting: 20 Seconds
- Intermission: 2 Seconds
- Power by internal battery
- Deselecting Range: 8M
- Deselecting Angle: 110 Degree
- Holding bracket included
- Telescope antenna
- Easy installation
- Wireless magnetic door entry detector:
- Easy mounting on the edge of door or window
- Working status LED indicator
- Low battery LED indicator
- Telescope antenna
| Payment Terms: | TT/WU/PAYPAL |
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,