Silicone rubber potting compound for led ----------
Silicone rubber for Potting compound silicone rubber is mainly suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation , LED screen, Wind Power Generator, PCB substrate, etc.
Silicone rubber potting compound for led features------
Silicone rubber for potting compound for led is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting.
Silicone rubber potting compound for led advantage -------
Silicone rubber potting compound for led with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time.
TECHNICAL GUIDELINES of silicone rubber potting compound for led ---
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.
4, The temperature influences the curing time of HY-9060#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature.
click for larger image
To report fraudulent or illegal content, please click here
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
China Suppliers Quick Searching: