Features:
K11 organic and inorganic compound waterproof slurry is one of the world's most advanced waterproof materials and also the latest generation of international namely the fourth-generation waterproof coating. It is suitable for industrial and civil buildings. Completely waterproof and protect the steel, reinforced concrete strength.
1, infiltration and clogging type, of the hydrophobic silica-based polymers, the active ingredients can penetrate into the pores in the cement-based surface, cracks, and make chemical reaction, integrated with the substrate, forming a waterproof layer of fine crystal dendrite-like, block the water channel, preventing the water from any direction, to achieve the purpose of waterproof at whole.
2, belongs to modified cement-based materials to achieve the overall purpose of waterproof
3, for the positive and back side of water, under high-pressure water still make effect
4, permanent waterproof, excellent weather resistance and aging resistance (acid corrosion, high temperature, freezing and thawing)
5, with wear resistance, no shrinkage, can prevent the infiltration of carbonate substrate, inhibiting the growth of mold and prevent pollution and erosion of concrete by salt
6, good ventilation to keep the substrate dry (unique respiratory function, essentially eliminate the hollowing phenomenon)
7, environmental-friendly product, non-toxic, harmless, and no irritating odor, can be directly used for drinking water tanks, swimming pools, water tanks, etc.
8, easy to operate, needs short time, “cold” construction, can withstand the pressure within a short time; can make the base construction under wet surface
9, after the slurry dry, mortar protective layer can be directly paste or brushing process, reduce costs
10, K11-MKowns good flexibility, can bear the slight vibration and small cracks that caused by any reason.
Application:
1, the waterproof for indoor and outdoor concrete structure, cement structure, brick wall and so on
2, hydraulic projects, power stations, factory warehouses, food storehouses, tunnels, kitchens, underground car parks, drainage and walls, floors, swimming pools, water tank of waterproof projects
Surface Treatment:
1, the surface should be stable, clean, smooth, no dust, no oil, no shedding, and other detrital materials
2, the obvious pore and hole must be silted up by the cement mortar, the sharp edges should be wiped out
3, moist the surface with clean water till there is no clear water before operation
Operation Process:
1, pouring the additives into the container, and then slowly pour the powder and stir them into a uniform powder-free and with no deposit paste
2, during the operation, keep intermittent stir to avoid precipitation
3, using brush or roller to brush on the surface of the basic construction directly, do not leak anywhere. One time is for anti-damp, second or more time for waterproof.
4, after the first time about 2-4h make the second time, and ensure their direction are opposite.
Tips:
dealing with the surface according to the requirements, if under the heat and sun exposure, cooling the surface in order to reduce the temperature.
b, using brush , brushing the mixed slurry on the surface evenly and make sure no flaws and vulnerabilities.
c, after the first time of brushing ,wait for about 2-4 hours , brushing the second time, the direction should be opposite for the two times.
Normal Amount:
1, 4-6m2/kg
2, thickness: around 0.8-1.2mm
Cautions:
1, do other covers after the waterproof layer totally dry.
2, for a better effect, do not operate under -5℃ or particularly damp and unventilated situation
3, never mix the dry slurry with water and use again
4, for the nodes, should process in accordance with relevant requirements, add a fiber layer
5, under special situation, our company can provide operation scheme by the technical department.
Store Method:
Store in cool and dry place, unopened product can be saved for one year.
Packing:
20kg/barrel, 2kg/barrel
