Features:
1050/1060/1070/1100: The products have good ductility and corrosion resistance, suited for oxyacetylene gas brazing pure aluminum as well as argon arc.
4043/4047: Good corrosion resistance, wide range of usage, used as fulling materials while gas welding and organ arc welding of aluminum alloys other than high magnesium alloys.
5183/5356/5556: Good corrosion resistance and high strength, wide range of usage. Argon arc welding of aluminum alloys.
Technology data for your reference
ER1100:
Si & Fe≤0.95; Cu≤0.05-0.20 Mn≤0.05 Zn≤0.10 Be≤0.0008 Al: Balance
Pure aluminum series1100
Good anti-corrosive and plasticity
ER4043
Si:4.50-5.50 Fe<0.80 Cu<0.30 Mn<0.05 Mg<0.20 Zn<0.10 Be<0.0003 Ti<0.15 Al: Balance
AL-Mg-Si casting aluminum
The anti-thermal crack performance of the welded joint is good, but the plasticity, toughness are low, becomes grey black after anodic process
ER4047
Si: 11.00-13.00 Fe<0.60 Cu<0.30 Mn<0.05 Mg<0.10 Zn<0.20 Be<0.0003 Ti<0.15 Al: Balance
Casting Al, Al-Cu casting, Al-Mg_Si casting
The anti-thermal crack performance of the welded joint is good, but the plasticity, toughness are low, becomes grey black after anodic process
ER5356
Si<0.25 Fe<0.40 Cu<0.10 Mn: 0.05-0.20 Mg: 4.50-5.50 Cr: 0.05-0.20 Zn<0.10 Be<0.0003 Ti: 0.06-0.20 Al: Balance
Al-Mg casting, Al-Mg-Si casting, Al-Zn-Mg casting
Typical welding wire used most widely, good mechanics performance and anti-corrosiveness
ER5183
Si<0.40 Fe<0.40 Cu<0.10 Mn: 0.05-0.10 Mg: 4.30-5.20 Cr: 0.05-0.25 Zn: 0.25 Be<0.0003 Ti<0.15 Al: Balance
Al-Mg casting 5183
Typical welding wire used most widely, good mechanics performance and anti-corrosiveness
Package : wires is covered by plastic foil,and outside with carton
TIG RODS:(L:1000mm)
ER1050:1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER1060:1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER1070: 1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER1100: 1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER4043:1.6mm,2.0mm,2.4mm.3.2mm,4.0mm
ER5356:1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER4047:1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER5183:1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
ER5556:1.6mm,2.0mm,2.4mm,3.2mm,4.0mm
MIG WIRES:
ER1050:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm,2.4mm,3.0mm
ER1060:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm,2.4mm,3.0mm
ER1070:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm,2.4mm,3.0mm
ER1100: 0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm,2.4mm,3.0mm
ER5356:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm
ER4043:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm
ER4047:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm
ER5183:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm,2.0mm
ER5356:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm
Weight:20kg/spool;6-7kg/spool;2kg/spool;0.45kg/spool
