| |
12V 75W Ballast |
|
| Applicance performance |
Standard |
Product actual text |
| Lumen |
|
90Lm per 1Watt |
| Bulb Open circuit protection test |
<1.5 second stop working |
√ |
| Power short circuit protection test |
<High voltage cable within2 seconds stop working |
√ |
| Input power reversed connect protection test |
after reversed connect keep normal work,no damage |
√ |
| Over Voltage Protection test |
Can not exceed MAX32V |
MAX32V |
| Low Voltage Protection(Power off) |
≤9V |
9V |
| Cold Start Current |
Voltage13.2V,≤9A |
13.2V=9A |
| Hot Start Current |
Voltage13.2V,≤9A |
5A |
| Stable Current |
Voltage13.2V,≤8A |
3.5A |
| Stable Output Power |
Voltage20-30V,Voltage fluctuating:±3W |
√ |
| Stable Bulb Power |
75W±5W |
77W |
| Inside consumed Power |
≤15W |
12W |
| Flash Text |
Each 2 seconds On and Off,work under normal situation |
√ |
| High Voltage isolated protection |
Resistance≥1MΩ |
√ |
| Lowest Start Power |
≥20.5V |
20V |
| Bulb Working frequency |
300Hz |
300Hz |
| Ballast working Temperature |
after light 20min,Circumstance ≤ 25°C |
30°C |
| Ballast Efficiency |
≥85% |
87% |
| Input touch shake |
Automatically reset within 1.2 seconds |
Reaction time:0.1 sec |
| Working Voltage Range |
20-32V DC |
√ |
| Electric Wave Radiation |
Fit National Standard |
√ |
| Max Current |
≤15A |
MAX 0.01sec |
| Bulb working voltage |
95~150V AC Square wave |
|
| Start Max Voltage |
26KV |
|
| When install ballast please add our special relay |
|
| |
|
|
| Length |
151mm |
|
| Width |
97mm |
|
| Height |
36mm |
|
click for larger image
Img 1
Img 2
Img 3
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
