●Application of ESC:
Model boat ; ship
●Electrical performance parameters of ESC:
Input Voltage: 2-4 LiPo batteries / 5-12 NiMh batteries
Continuous current output: 30A
The maximum allowable instantaneous current (10S):
40A
BEC type: UBEC / OPTO
BEC output: 5.5V/3A (UBEC), 5.5V/1A-3A (UBEC)
Standard configuration: UBEC 5V/3A
●Shape and weight of ESC:
Dimensions (Length * Width * Height): 54 * 25 * 14
Weight: 40G (with BEC), 38G (OPTO)
Positive and negative power wires: wire size16 #; Material: Copper Silicone Wire; Color: + Red – Black ;Length: 100 (mm)
UVW wire: wire size 16 #; Material: Copper Silicone Wire; Color: U Black V Blue W Red; Length: 80 (mm)
Signal wire: wire size 24 #; Length: 200 (mm); Connector specification: 3pin DuPont terminal
Model suitable for T head:
Rubber head Specification: ￠3.5*12
Thrum heat shrinkable catheter specification: ¢ 4.5 * 20 Color: Red White Black
Water-cooling heat sink specification: 24 * 30 Color: Rosy
Water-cooling heat dissipation aqueduct: ￠5 Length: 31*m4 Color: Silver
Electric heat shrinkable catheter tone specification: ￠25*60 Color: Transparent
● Parameter settings of ESC:
Battery type and its number settings, the default is automatically set;
There are four options for the throttle control setting; the default is low acceleration, which is suitable for occasions that battery performance is not ideal;
There are four options for the ESC operating mode setting; the default setting is no brake;
There are four options for the ESC power feature, the default setting is positive spin and soft low-voltage protection (commonly known as lower power);
There are four options for the timing setting; the default is 1 ° (for internal rotation motors within 2-4 poles);
There are two options (8 KHz, 16 KHz) for the PWM operating frequency setting, the default is 8 KHz.
● Standard configuration:
Power line length: 100 (mm) UVW line length: 80 (mm), no rubber head or T head UBEC 5V/3A
● Main features:
