TECHNICAL DATA
EMM-YCWJ-3038-L1212
Technical characteristics description
CNC water-jet cutting machine is composed with cutting table, HP pump, CNC control system with cutting software, cutting head, Hp water valve, and sand controlling system. Also you can choose optional systems such as auto abrasive feeding system, water softening system and oil cooling system according your requests.
1.1EMM-YCWJ-L1212-1D structure feature
1.1.1structure feature
- Casting beam and Y-axis base frame make it have excellent precision and stability.
- Table body and water tank which are sub aspect structure, lessen the pressure of sands and machined parts to moving parts.
- X-axis and Y-axis transmit to rolling nut ball screw mandrel.
1.1.2Controlling system
We adopt the famous NAIKY controlling system and MITSUBISHI AC servo digit driving system and AC servo motor.
- 17”LCD liquid crystal display
- DNC on-line working function
- Functions of returning arbitrary point, bending, and circular arc working auto deceleration.
- Function of cutting figure imitation display.
- 80GB memory hard disk
- MITSUBISHI AC servo driver and motor.
-1GB memory card
- Multilingual function（Chinese English ,etc.,）
- Drive-by-wire and hand-hold controller,(according to requests)
1.1.3Chief technical parameter
- structure：Bridge
- size（X×Y）：1200mm´1200mm
- X-axis：1200mm
- Y-axis：1200mm
- Z-axis：150mm
- repeatability：0.025mm
- X、Y speed：0-15m/min
- controlling accuracy：±0.01mm
- cutting accuracy：±0.1mm
power：380VAC, 50Hz , 3 phase 4 wire system (can be customized)
1.1.4Transmission system
- We adopt ABBA (Taiwan) ball screw and HIWIN (Taiwan) lead rail to ensure accuracy
durable and quality.
1.1.5Prevention system
- Over travel auto spacing function and soft spacing function
- Unique prevention design: new mazy protection and z-axis totally enclosed professional design prevent sand and water from eroding the guide screw and lead rail.
1.1.6Lubrication system
- We adopt auto mass lubrication system to make oil reach every oil site on time and also make table steadier and easier.
|
2 Abrasive cutting system
|
Abrasive cutting system is composed with EMMYCWJ integrative cutting head, YCWJ Hp water switch, EMMYCWJ abrasive meter, sand valve and sand feeding bin.
2.1 EMMYCWJ integrative abrasive cutting head
The cutting efficiency of EMMYCWJ integrative abrasive cutting head is one of highest machine in the world.
- It has rectification function and lessens the time of assembling.
- Changing the wearing parts is simple.
2.2 EMMYCWJ hp water switch
- Air valve can open and close the hp water instantaneously.
- With the help of CNC we can control hp water automatically.
- Blockage pressure can be adjusted arbitrarily to realize the operation under the low pressure circumstances.
2.3 EMMYCWJ-sand feeding system
- Dynamic sand feeding
- Manual makes up the sand for the feeder (assisted with sand meter, auto feeder can realize automatically feeding)
2.4 DCAS-B sand valve
- Dynamic sand feeding
- Dynamic type comes over traditional type.
- Manual type makes the operation easier.
- With the help of CNC we can control abrasive automatically.
2.5sand hopper
- Side-hanging sand hopper
- There is a window on the side face. It can remind workers when to feed sand
- It can provide the sand consumption every time after it is filled up.
3.1 (configuration) EMM-YCWJ-3038Hp systems
3.1.1 Hp generator
-the configurations single pole two-way plunger type intensifier
- The chief hp spare parts (HP Cylinder, plunger, HP seals, low pressure seals, low pressure check valve body) of intensifier are imported from KMT
- USA pipeline
- Single-row type water filtering system (5Micron, 1micron, 0.45micronparallel)
- Manual pressure regulation function
- Extra pressure auto stop and protection
- Three-ply safeguards
- Plunger Oil pump is from Shanghai HP Pump Company
