Product Description
protable TDS-2B meter
SPECIFICATIONS:
|
*Range:0~9990ppm (mg/L)
|
|
*Accuracy: ±2%F.S
|
|
*Calibration:Factory Calibrated
|
|
*Temperature Compensation: Automatic
|
|
*Operating Temperature: 0~50°C
|
|
*Power source: 2×1.5v(button cell)
|
|
*size: 142X 25X15mm
|
|
*weight: 36g
|
OPERATING INSTRUCTIONS
1. remove the protective cap.
2. press the ON/OFF button once out of the water. The tester will read “000”
3. Immerse the tester into the water no more than 2 inches.
4. wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.
5. press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6. after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
