Home > Products > Chemicals > Inorganic Chemical Materials > Oxide

Product description:
At infrared wavelengths at 900nm point near infrared IR infrared blocking rate reached more than 85%. AMS-99 is compounded by high performance insulation meson GTO nano materials transparent glass heat insulation paint, with high insulation performance and good transparency, the dry film thickness of 3 micron state infrared wavelengths in 1400 points IR infrared blocking rate reached 99%. Coating with spectral selectivity and stability of intelligent, coating with high hardness, good transparency, high barrier properties, infrared and ultraviolet (UV), energy saving, environmental protection, flame retardant, noise isolation, use long life, not afraid of water, afraid of acid and alkali, construction is convenient, easy to promote. The advent of the product will be in the field of architectural glass, automotive glass window to achieve more effective warm in winter and cool in summer, greatly save energy, to create a more comfortable indoor environment of energy saving and environmental protection and provide technology guarantee, to fill the gaps in the domestic and foreign markets.
Main performance parameters:
Index name
performance parameter
Appearance
Blue liquid (two-component)
Principal component
GTO nano thermal insulation media
Infrared Ray Rejection
At 1400nm = 99% at 900nm = 85%;
PH value
7 + 0.5
The proportion of
0.9 g/cm3
Visible light transmittance
More than 65%
Ultraviolet rejected
More than 99%
hardness
5-6H
adhesion
0
Noise reduction
15-20 DB
Coating thickness
2-3 M
Film life
20 years
Construction area
40m2/L
Main use:
Used for energy-saving building glass, reduce energy consumption.
Used for building glass, solar glass, glass curtain wall, advanced hotels, hotels, office buildings, private homes, exhibition hall, etc. to improve the comfort and energy efficiency.
Used in automobiles, trains, aircraft, ships and other means of transportation and the glass insulation and anti ultraviolet radiation, improve comfort and energy efficiency
Glass for indoor need to block and shield ultraviolet rays.
Usage method；
Before the construction of the construction of the glass to clean, dry surface without moisture when the construction..
The A and B components according to the product specification requirements according to the proportion of good mixing slightly after curing 10-20 minutes after use.
Prepare the sponge scraping coating tool and dip trough, the paint into a clean dip in the trough, dip in a good amount of paint to paint the next construction can be.
It is best to use the A and B components in 3 hours after mixing, otherwise it is possible to increase the viscosity of paint, not easy to use.
Matters needing attention：
1, the construction of choice:
Single layer glass: indoor and outdoor.
Double glass to choose the outside of the room construction.
2, transport preservation method:
The product should be kept as far as possible to choose a cool place.
Ambient temperature of 25 degrees ~35 degrees three months effective.
Ambient temperature of 5 degrees ~15 degrees 6 months effective
3, can be applied to the substrate:
Transparent glass, transparent acrylic, transparent PET, transparent PP
When used to do a good job of protection, to prevent access to the mouth and eyes.
Packaging specifications;
1/2/20 L