Model: | X-360 |
---|---|
Brand: | Grace times blessing |
Origin: | Made In China |
Category: | Chemicals / Adhesives & Sealants |
Label: | Anti-corrosion paint , Moistureproof paint , Protective lacquer |
Price: |
¥75
/ kg
|
Min. Order: | 10 kg |
Product features:
1, anti-corrosion paint for aggregate-organ of ambient curable resin, use very convenient. Insulation good performance.
2, anti-corrosion paint colorless transparent, excellent adhesion, good elasticity, curing speed and excellent weatherability and excellent electrical properties.
3, anti-corrosion paint with insulated, moistureproof, prevent leakage, shockproof, dustproof, anticorrosion, prevent salt fog, mouldproof, prevent ageing resistance, corona purposes.
4 and method of use:
(1). This product can use brush, spraying, soaking and coating methods such as construction. A film thickness is in commonly 0.1-0.2 mm between advisable
(2). In before painting, must first will about to besmear objects on the surface of the water and oil cleanse.
(3). The first line of coating table dry, can besmear again.
(4). Use up brush, spray gun etc should be timely washed to stores of times reoccupy. Construction attention ventilation, eli paint of solvent volatilization, ensure safety.
5. This product is of packaging, when using the aggregate-organ by contact with moisture air of curing. One should not use up in time to cover good hoped times reoccupy.
Anti-corrosion paint widely used in hybrid integrated circuit, automotive electronic control board, printed circuit board, aviation instrumentation, flexible printed circuit board, computer console, industrial control board, semiconductor crystals line protection, home appliance controller, outdoor LED display, etc.
Three proofing lacquer data table
project | unit | Specification values | Test method |
appearance | ---- | transparent | visual |
viscosity | mPa·s | 600-800 | JIS K6249 |
hardness | TYPE A | ≥50 | JIS K6249 |
Dry time table | min | 5~15 | Refers to the contact method |
Tensile strength | MPA | ≥6.5 | ASTM D4632-08 |
Peel strength | N/mm | ≥8 | IPC-TM-650 |
Shear strength | MPa | ≥5 | ASTM D 1002 – 01 |
Tore elongation | % | ≥30 | JIS K6249 |
Dielectric loss | 100HZ | 0.004 | JIS K6249 |
Insulation damage intensity | KV/mm | ≥60 | JIS K6249 |
Dielectric constant | 100HZ | 2.7 | JIS K6249 |
Induced electric is connect | 50HZ | 0.0016 | JIS K6249 |
Volume resistivity | Ω·cm | ≥1×10+15 | JIS K6249 |