Description:
OBD2 OBD II Diagnostic USB Cable KKL409.1 VAG-COM 409.1
Vag-Com 409.1 Scanner USB VW/Audi/Skoda/ Seat OBD OBD2
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
--Volkswagen
--Skoda
--Audi
--Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW,PWM or Can-bus.
2. Terminal K = Bus of communication
3.Terminal L= Ignition for waking up car computing system (ECU: Engine Control Unit)
4.Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5.This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only
6.Supported also ISO9141 protocol
7.The cables may work with some versions of the Carsoft, but carsoft used a lot of different intercaces during the different versions and also had some custom interfaces.
8.Product running as virtual comport, like many products it usees a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.
9.Read & erase error code, log data e. g. speed, gasoline, consume engine-rotating(RPM: Rotation Per Minutes).
Packaged insided:
1. 1 x Cable
2. 1 x Driver CD
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,