Autopilot for Heading control of ships & vessels.
Type:SY-168.
Display screen:LCD
[inculde one Host, one Rudder angle transmitter(Black),one Fluxgate Azimuth Sensor,one Manual follow-up,one Solenoid valve , other accessories: install panel, power wires, transmitter's connection rod,etc]
Features:
(1)This product adoptsprecise military potentiometers as components for transmission and feedback,
(2)The output control is contactless SSR solid-state relay, and use precise integrated circuit control, have the advantage of high control accuracy, low noise, long service life, applicable to all kinds of ships and accurate control of hydraulic steering gear.
1.Power supply:DC24V±30%,0.2A
2.Steering rate:2.5deg~5deg/second;
3.Remote Sensitivity: <1.0deg,(adjustable)
4.Solenoid valve power: DC24V, 5A;
5.Operating mode:
1)Manual (Press the button of Left[Red] or Right[Green] on the panel to operate and to get the wanted rudder Angle value)
2)Remote(Through the manul remote-control unit called “manul follow-up”connected to the host to operate the ship rudder at Different positions of the ship )
3)Auto(Set the heading orientation of the ship, then automatically operate ship at the setted orientation;1) when press the botton of Left[Red] or Right[Green] on the panel to operate, the mode enter into Manual mode,and it’ll back to Auto mode for a few seconds after loosing the bottons; 2)and when rotating the manul follow-up’s angle is more than 5°, the mode’ll enter into Remotel mode, and it’ll back to Auto mode for a few seconds after rotating the follow- up back to the middle position )
4)GPS(under this mode, when the host connected to navigation device, it can fix the deviation caused by the wave or tide and keep the ship at the right setted destination)
