IP-D130 Operation instruction
Inkjet heat transfer paper for dark-colour cotton fabric
Suitable for transferring different pattern onto dark-colour cotton or cotton-mixed fabrics.
1. Printing
l For use with any chromatic inkjet using dye or pigment inks.In order to get the satisfactorily printing result, we recommend to use the“photo quality inkjet paper”.
l Printing pattern onto transfer paper firstly and leave it to dry for about 10 minutes before transferring.
l Cut out the pattern,leaving a narrow margin of 5mm around the pattern edges.
2. Transferring
l Pre-heat the pyrography machine still the transfer temperature arrive to 150-165℃.
l Peeling the face paper(film-layer material)from the back paper.
l Placing the face paper(film-layer material)on the fabric so that the pattern face-up(I.e.,the pattern is exposed;it is not face-down against the fabric).
l Placing a sheet of protective(release)paper over the pattern.
l Pressing with the pyrography machine about 20 to 30 seconds; then take out the fabric, and peeling the protective paper after cooling.
3. Washing
l Donot wash it within 24 hours after transferring.
l Washing the textiles with cool or 30-40℃water,Donot washing it by bleach and alkaline detergents.avoid powerful cleaning to damage the transferring pattern.
l Donot tumble it for drying,the best way is airing it in a cool place.
l Donot dry-clean.