Scratch resistant & release agent for engineering compounds
Product Description
Silicone masterbatch LYSI-07 is our new product which dispersed in PA6 with ultra-high molecular weight (UHMW) silicone content. It overcomes the weakness of traditional silicone oil as the additives, and it has large silicone content, ultra-high molecular weight, no precipitation and not slipping in the screw extruder and so on.
Typical performance:
Features:
Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling mold release and reduce product defect rate
Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture, scratch resistance and abrasion resistance.
Enhanced fuel resistance, reduced smoke density, improve the impact strength.
Lower surface energy and improve the hydrophobic properties.
Good stability, non-migratory and surface without precipitation.
Applications:
PA series materials ( to improve flow ability, mold release, floating fiber )
Use methods:
Drying the LYSI-07 at 80-120℃ about 4 to 5 hours, mixed with PA equally, then injection or extrude it to pellet. Or mix the LYSI-07 and PA resin first, then molding after dried.
Recommend dosage: when added at 0.5%to 2%, can improve the product’s processing, liquidity and mold release. At a high level: 1% to 10% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). Added level at 2% to 5% is effective to improve the abrasion resistance, abrasion reduction to 30% to 80%
Package
25Kg, paper bag
|
Name LYSI-07
|
|
Appearance white pellet
|
|
Silicone content % 40
|
|
Resin base low viscosity PA6
|
|
Dosage % 0.5-10
|
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
