This brand-new (FC) CNC WASP V4 BELT 250 helicopter which is equipped with 7-
   channel  transmitter,has been researched sucessfully.it's concepted to be a high performance,ease
   of control,stable,durable,and lightweigh helicopter.It adopts CCPM control component
   metal swashplate,metal tail rotor gear box set,belt driven system and professional gyro,which ensure
   the helicopter react fast on any kind of 3D acrobatic flying courses and flight stability.furthermore,our
   new SKYARTEC's CNC WASP V4 BELT 250 is equipped with high quality CNC alloy rotor
   head/frame and matched with high performance 4500KV Brushless motor,Brushless ESC,and Li-po
   Battery.

    This CNC WASP V4 BELT 250 should be the perfect choice for both the beginners and experts due
  to its compact size,stability,and agility.Also,it has a great advantage that is: it is suitable for
  indoor,outdoor,backyard and stadium flying.In addition. It can be flown easily near the ground,and is
  highly damage-resistant.so don't hesitate to choose this item.       Product included:   Wasp V4 Belt 250 CNC helicopter ;18A brushless speed controller;SKY 600 head locked gyro;
  4pcs servos ;4500kv brushless motor;SKY706 2.4GHz 7ch TX; SKY706 2.4GHz 7CH RX;11.1V900mah LI-PO battery and balance charger;Color PVC canopy      Feature:   Adopts CCPM control component , metal swashplate,tail rotor and Belt driven system, professional
  gyro,  which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and fllight
  stability.  7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down &Pitch Control
  (RUDDER,  AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set   High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight
  much stable and better performace   High quality CNC alloy rotor head dopts Light weight,Ultra tough Carbon Fiber side board.   Using alloy tail boom.   Can fly in skyway, backward, and 3D aerobatic   CCPM mixing control system and collective pitch structure   120 degree CCPM system provides precise movement if comparing with the traditional mechanical 
 mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced  mproved blades give superior lift. Their pop off design gives extra protection in case of heavy landing   Bell-heller mixing greatly increase the sensitive of the whole helicopter, which  provide good aerobatic
  responds   The autorotation landing system, made of high quality one-way bearing, maximally protects your
  helicopter from damage   Hard, Light weight  ABS Blades   Brand new design for the structure   Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance
  of flying   Tail rotor driven by belt provide stable flight and low noise.   NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas- Helicopter No need
  to  worry about burning tail motors   Outer placed Head Lock Gyro   11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight   With length-adjustable servo push-rod, precision sub trim can be easily set Separate main shaft and
  main gear reduce repair time and noise    Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and
  canopy reduce the load of whole helicopter    Easy to fly and more stable lifting    Sky706 2.4G receiving and transmitting system increases the operation stability    With adjustable pitch system and 3D conversion    Provide excellent performance outdoor and indoor    Tail blade adopt flameout landing system    Newly Designed Rotor Head gives better control    Pre position servo mounts have been added in this helicopter, servos can be    mounted solidly by screw and easy to install    Extreme smooth control and stable flight    Precise controlling and hovering    Digital Proportional Motor Speed Control    Suitable for Indoor/Outdoor/Backyard/Stadium    Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter
  does have very strong structure. In addition, the main rotor blades are using top
  quality  ABS Blades , which is extremely light and not easily break   Approximately 15 minutes flight time on each charge - Optional Li- poly battery
   will help to achieve better performance and longer flight time.    Best choice for Beginner - Advanced hobbyist    All spare parts and accessories are available      Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA
   batteries for the  transmitter not included)      Specification:                      Main Rotor Diameter : 470mm                                  Length : 460mm                       Flying Weight : 330g                      Driven system : Skyartec 4500KV brushless motor                                      Gyro : Sky600 Head Lock                                      Serv : 3X Skyartec 9g + 1X Skyartec 5g                                       ESC: Skyartec 18A                                  Battery : Skyartec 11.1V 900mAh Lithium Li-Po                       Control system: SKY706 2.4GHz  7CH Transmitter and SKY706 2.4GHz  7CH Receiver  

RC model helicopter-Belt250
WASP V4 Belt 250 CNC RTF with CCPM/ 18A ESC/4500KV Motor 2.4G
This brand-new (FC) CNC WASP V4 BELT 250 helicopter which is equipped with 7-channel transmitter,has been researched sucessfully.it's concepted to be a high performance,ease of control,stable,durable,and lightweigh helicopter.It adopts CCPM control component metal swashplate,metal tail rotor gear box set,belt driven system and professional gyro,which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and flight stability.furthermore,our new SKYARTEC's
CNC WASP V4 BELT 250 is equipped with high quality CNC alloy rotor head/frame and matched with high performance 4500KV Brushless motor,Brushless ESC,and Li-po Battery.

This CNC WASP V4 BELT 250 should be the perfect choice for both the beginners and experts due to its compact size,stability,and agility.Also,it has a great advantage that is: it is suitable for indoor,outdoor,backyard and stadium flying.In addition. It can be flown easily near the ground,and is highly damage-resistant.so don't hesitate to choose this item.

Product included:
Wasp V4 Belt 250 CNC helicopter ; 18A brushless speed controller ; SKY 600
head locked gyro ; 4pcs servos ;4500kv brushless motor ; SKY703 2.4GHz 7ch
TX/RX ;11.1V900mah LI-PO battery and balance charger;Color PVC canopy

Feature:
Adopts CCPM control component , metal swashplate,tail rotor and Belt driven system, professional gyro, which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and fllight stability.

7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set

High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight much stable and better performace

High quality CNC alloy rotor head dopts Light weight,Ultra tough Carbon Fiber
side board.

Using alloy tail boom.

Can fly in skyway, backward, and 3D aerobatic

CCPM mixing control system and collective pitch structure

120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced mproved blades give superior lift. Their pop off design gives extra protection in case of heavy landing

Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds

The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage

Hard, Light weight ABS Blades

Brand new design for the structure

Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying

Tail rotor driven by belt provide stable flight and low noise

NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-

Helicopter No need to worry about burning tail motors

Outer placed Head Lock Gyro

11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight

With length-adjustable servo push-rod, precision sub trim can be easily set

Separate main shaft and main gear reduce repair time and noise

Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter

Easy to fly and more stable lifting

Sky703 2.4G receiving and transmitting system increases the operation stability

With adjustable pitch system and 3D conversion

Provide excellent performance outdoor and indoor

Tail blade adopt flameout landing system

Newly Designed Rotor Head gives better control

Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
Extreme smooth control and stable flight

Precise controlling and hovering

Digital Proportional Motor Speed Control

Suitable for Indoor/Outdoor/Backyard/Stadium

Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality ABS Blades , which is extremely light and not easily break

Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.

Best choice for Beginner - Advanced hobbyist

All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA
batteries for the transmitter not included)

Specification:
Main Rotor Diameter : 470mm
Length : 460mm
Flying Weight : 330g
Driven system : Skyartec 4500KV brushless motor
Gyro : Sky600 Head Lock
Serv : 3X Skyartec 9g + 1X Skyartec 5g
ESC: Skyartec 18A
Battery : Skyartec 11.1V 900mAh Lithium Li-Po