chip resetter for epson 7600/9600 printer
Add to Basket
EPSON 7800/9800/7880/9880/7450/9450 chip resetter
1、 For use with Epson;4400/4450/7400/7450/9400/9450;
2、 Can reset OEM or compatible chip,user could use refill ink manufactured
by third party,save printing cost a lot.
3、 Can reset cartridge chip and waste ink tank chip together.
Epson original ink cartridge price remains high and not falls. So how to save printing
cost is everybody’s concern. Epson cartridge utilizes chips to memorize ink volume,
so even refill the empty cartridge to full ,it is still useless ,because the data within the
chip is 0 ,and can not print. This makes the printing cost very high.
We lanuch the chip resetter ,could wipe off the chip date for the ink volume of epson
ink cartridges ,and reset it to 100%.And this way,you just need to refill inks ,and
continue to use ,save your printing cost up to 90%.
Our chip reseter system is multifunctional.
Ocbestjet chip resetter could automatically indentify the cartridge no.wipe off the ink
volume data ,and reset it to 100%,and do not change the cartridge attribute .It is the
first product compatible to Epson wide-format printer cartridge chip.
For use with refillable ink cartridge with chip:
/9300，and maintainence cartridge chip C12C890071 etc。
Method of application：
For EPSON Wide-format printer,there are 2 parts need to be reset, one is ink, the other
is maintainence tank。The operation method is same.
1. Fit the chip to the groove of chip resetter,enable the probe of chip resetter contacts the
contactor of the chips.
2. Press the 2 components together, if the red light gleams ,it means the connection is fine.
3. 5 seconds later, the red light turns to green light,it means the chip data has been refreshed.
4. Refill dye inks or other brand compatible ink ,the cartridge could be used again.
1. Red light gleams and it is always on ,and not turn to green.
1.Red indicator light gleams, then it always shines ,does not turn to green light.
Reason 1：The probe and the chip contactor do not connect well, or the chip contactor
Reason 2：If the cartridge is not Epson OEM cartridge ,the chip contactor could not
connected with the probe well .
2.After reset the chip,and refill the inks,there are broken lines while printing.
Reason 1： Refill ink quality is bad.It is recommend to use ink that could match
Epson OEM products in color and related features.
Reason 2：There are air bubbles while refill inks,you should refill inks slowly.Or before
you use the ink cartridges,keep the cartridges with the nozzle downward for 24 hours.
click for larger image
To report fraudulent or illegal content, please click here
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
China Suppliers Quick Searching: