Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Model	Pt-650
Applicable fibers	SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length	12~16mm（Coating diameter：250μm）    16mm（Coating diameter: 250 ~ 1000μm）
Fiber diameter	Cladding diameter：80 ~150μm  Coating diameter：100~ 1000μm
Fiber Count	Single
Fiber aligning method	Core or clad aligning
Image processing method	Digital
Actual average splice loss	0.02dB （SM）, 0.01dB (MM),  0.04dB (DS), 0.04dB( NZDS)
Splicing time	Typical 9 sec，with standard SM fiber
Splicing mode	53(templet), 40(user)
Splice loss estimate	More accurate
Return loss	＞60dB
Storage of splice result	4000 results，20 parameter per result
Fiber display and magnification	300X（X or Y view）,150X（X and Y view）
Tube heating time	Typical 30 sec
Tube heating mode	9(templet), 24(user)
Tube heating temperature	Can be adjusted
Applicable Protection sleeve length	60mm, 40mm and a series of micro sleeves
Tension test	2N
Electrode life	2500
No.of splice/heating with battery	Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen	5.6 TFT inch color LCD monitor
Image change over	The fiber image is turned upside down
Terminals	USB 1.1 and VGA
Operating condition	0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s
Power supply	AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions	150mm(L) x150mm (W) x150mm (H)
Weight	2.7 Kg excluding battery,3.2 Kg including battery

Features
• Equel to Fujikura FSM-50s, Sumitomo Type-37 etc
• Core to core alignment by PAS technology
( PAS:Profile Alignment System)
• Digital fusion splicer with automatic focus function
• Fiber core can be display clearly
• Single X or Y view and X & Y view simultaneously
• Auto detect cleaved endface fault
• Display fiber cleaved and offset angle
• Display core and clad offset
• 5.6 inch TFT color LCD monitor with clear digital image display
• USB & VGA interface
• Software upgrade via USB interface
Specification