Model: | W7-12000W |
---|---|
Brand: | Snaterm |
Origin: | Made In China |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | dc to ac converter , 10kw home inverter , frequency inverters |
Price: |
US $970
/ pc
|
Min. Order: | 1 pc |
Live Chat: | Last Online:19 Jun, 2017 |
Ms Rita Wang
Skype: powerelek
sales(at)snatenergy(.)com
manager(at)powerelek(.)com
Welcome to visit our offical Online shopping platform www(.)snatenergy(.)com for more information and price list.
Pure sine wave inverter supplys high quality and stable AC power for office ,home and other special workplaces,and it totaly workable on indictive loads
Provides safe and reliable power protect solution for the following equipment:
● Equipment is Office and Public
● Home Appliances
● IT Network Equipment
● Manufacture Control System
● Solar Energy System
● Oil field and Fieldwork
Features:
On inverter
● High overload ability
● Low battery voltage trip selectable, extracting max power from various batteries with different protections
● Low quiescent current, selectable sensing cycle to reduce power consumption
On battery charger
● 3-step intelligent battery charging
● 8 preset battery type selector plus de-sulphation for totally flat batteries
● Powerful charge rate up to 100Amp ,selectable charging current
● PFC(Power Factor Correction) for charger, less power consumption than conventional units
On Transfer
● Delay before transfer, extra protections for loads under generator mode
● Input AC voltage range selectable, for different kinds of loads
● 8 ms typical transfer time, guarantees power continuity
● 30A/40A through current ability
● Output voltage regulation optional
On remote control & other features
● Ability to switch the unit on/off
● Ability to select/deselect power saver mode
● 17 alarms/warnings, informative for easier operation and trouble-shooting
● LCD status display available
● RS232 communication port optional
Specification:
Model No: |
8048E |
10048E |
12048E |
||
Continuous Output Power |
8000W |
10KW |
12KW |
||
AC INPUT |
|||||
Phase&wave form |
Single Phase Pure sinewave |
||||
Voltage |
220VAC/230VAC/240VAC |
||||
Acceptable Voltage |
154-273VAC |
||||
Line Low Transfer |
154V |
||||
Line Low Return |
164V |
||||
Line High Transfer |
273V |
||||
Line High Return |
263V |
||||
Frequency |
50HZ or 60HZ(Auto Senging) |
||||
Line Low Transfer |
40HZ |
||||
Line High Transfer |
80HZ |
||||
OUT PUT |
|||||
Phase&Waveform |
Single phase& pure sine wave(Bypass mode Sync to input) |
||||
Voltage |
220VAC/230VAC/240VAC(same as input on bypass mode) |
||||
Voltage Regulation |
10%ms(bypass mode sync to input) |
||||
Frequency |
50HZ or 60HZ(Auto sensing) |
||||
Crest Power |
10s 3 times of Ratings.10s |
||||
Short Circuit Protection |
Yes,shutdown |
||||
Power Factor |
0.9-1.0 |
||||
DC Input |
|||||
Battery Voltage |
48V |
||||
Minimum Start Voltage |
40V |
||||
Low Battery Alarm |
44V |
||||
Low Battery Transfer |
40V |
||||
High Voltage Alarm |
64V |
||||
Max Charging Current |
75A |
85A |
100A |
||
Over Charge Voltage |
62.8V |
||||
Transfer Efficiency |
|||||
Line mode |
>95% |
||||
Battery mode |
>85% |
||||
Power Saver |
Available when the load is less than 50watts |
||||
Indicators |
|||||
4-LED display |
Charge,Line,Inverter,Fault |
||||
LCD Display |
Input Voltage,Ouput Voltage,Frequency,Battery Voltage,Load,Temperature,Charge Current,Fault. |
||||
Swith Selector |
Saving Model in On/Off when push the switch fromwards/backwards,Keeping it horizontal is tuming the inverter off |
||||
Audible Alarm |
Sounding when the heatsink's term is over 105 degree and shutdown after 30 seconds. |
||||
Protections |
Low battery,over charging,over temp.over load |
||||
Communications |
RJ11/RS232(Optional) |
||||
Environment |
|||||
Operating |
0-40℃ ,0-95%RH(non-condesing) |
||||
Aidible Noise |
<60dB |
||||
Unit Size/Packing Size D*W*H(mm) |
549*450*201 |
584*450*201 |
|||
Net/GorssWeight(KG) |
56 |
64 |
68 |