LD-B10 dry-type transformers temperature controller
Product Description
1, the main features
▲ linear high platinum resistor winding temperature monitoring, and high reliability.
▲ liquid crystal display and LED indicator lights, work status, and measurements show more intuitive.
▲ the calendar clock, no need to re-set the clock after power outages.
▲ a standard RS-485 or PROFIBUS-DP communication interface.
▲ using new anti-jamming design to meet the national standard indicators of the electromagnetic compatibility requirements.
Third, the technical parameters
1, measurement range: 0.0 ~ 200.0 ℃
2, measurement accuracy: ± 1% FS (0.5 thermostat, sensor 0.5)
3, resolution: 0.1 ℃
4, the digital compensation range: -19.9 ℃ ~ +19.9 ℃
5, temperature sensor type: Pt100
6, relay contact output: Fan control contact capacity: 7A/250VAC
Alarm control output capacity: 7A/250VAC; 5A/220VDC
7, analog signal output: 4 ~ 20mA four
8, means of communication: RS-485 or PROFIBUS-DP bus
9, protection rating: not less than IP54
10, using the conditions: ambient temperature -20 ~ +55 ℃
Relative humidity <90% (25 ℃)
Supply voltage 220V (+10%, -15%)
Power frequency (50HZ ~ 60HZ) ± 2HZ
11 Installation: Wall
12, production standards: JB/T7631-2005 "transformer resistance thermometer" and IEC61000-4: 1995 International Standard GB/T17626-1998 "EMC test and measurement technology" standards
13, the product quality system: ISO9001 international quality management system certification
14, through the interference of pilot projects:
1) The common-mode AC 250V (50HZ) or series mode AC 200mV (50HZ) interference voltage, the display changes less than the basic error.
2) Electrical fast transients: thermostat power cord and input / output terminal can withstand the frequency 5KHz, voltages were 1KV 2KV and electrical fast transient test, display and control the absolute value of additional error limits to meet the standards .
3) Static Interference: 8KV thermostat can withstand electrostatic discharge test, display and control the absolute value of additional error limits to meet the standards.
4) Space radio frequency interference: thermostat can withstand the frequency of 80 ~ 1000MHz, field strength 10V / m electromagnetic field radiation tests, the display and control the absolute value of additional error limits to meet the standards.
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
