Features: LCD display Multistage charger Fast Action AC Synchronized Transfer Switch Microprocessor based design Heat-Sink built in internal Soft Start AVR design Input & Output isolated Auto temperature control fan Reverse polarity protection / by fuse / diodes / Output short circuit protection Temperature protection Overload protection Input low voltage protection Input high voltage protection Low battery alarm Low battery shut-down
Description: PURE SINE WAVE inverter with built in AC Charger and LCD Display Connect batteries and operate it as UPS.
Specifications:
Model No.
DE-8000LC
Output Power Continuous
8000W
Max. Surge Power
16000W
1. Input Section
Input Nominal Voltage
220Vac only
InputVoltageRange
120V~275Vac
Line Low Transfer
120Vac ± 2%
Line Low Return
130Vac ± 2%
Line High Transfer
275Vac ± 2%
Line High Return
260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section
Output Voltage
110Vac / 115Vac / 120Vac or 220Vac / 230Vac / 240Vac re-settable via LCD panel
Waveform
Pure Sine Wave
Voltage Regulation (Batt. Mode)
< 3% RMS for entire battery voltage range
Output Frequency
50Hz or 60Hz ± 0.1Hz
Efficiency
> 80%
Maximum Load
Up to short circuit
Asymmetrical Load Max.
Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor
1.0
3. Battery Section
VoltageRange
48VDC (42~62VDC)
Backup Time (at full load)
Long time available
InputFrequencyRange
45~70Hz
Max. Charging Current (5 steps selectable)
> 60Amp
4. Display
LCD Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.