01 300 MHz MIPS Processor
02 Linux Operating System
03 OLED – Display
04 MPEG-2 / H.264 Hardware decoding
05 Tuner: DVB-S, optional: DVB-C, DVB-T
06 Tuner Module, Plug&Play
07 1 x Smartcard-Reader
08 V.24/RS232 Interface
09 10/100Mbit Ethernet Interface
10 1 x Scart (RGB, FBAS or S-Video)
11 DVI
12 2 x USB 2.0
13 analog modem
14 S/PDIF Interface for digital bit stream out (AC-3)
15 64 MByte Flash, 256 MByte RAM
16 SATA
- for use either as internal SATA HDD 2,5“
- or to use for extern eSATA
17 Unlimited channel lists for TV/Radio
18 Channel-change time < 1 second
19 Automatic service scan
20 Directly bouquet-lists
21 EPG (electronic program guide)
22 Multiple LNB-Switching control (supports DiSEqC)
23 OSD in many languages and skin-support
24 Videotext Decoder
25 Extern 12V power supply
TECHNICAL DATA
DBS-Tuner mit DVB-S2:
Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink
Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD
USB
2 x USB 2.0 Host
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 15W at 12V
External PSU
Input:110-240V AC / 50-60Hz / 0,6A
Output:12V = / 3,0A
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 195 mm x 140 mm x 40 mm
Weight: 1,8 kg without HDD
Package Content:
* DreamBox 800
* AC Charger
* Remote Control
* AV Cable
* User Manual
