Product Description
1.Introduction
Inside each fire-resistant housing are equipped LEDs, photo switch, infrared sensor, power converter. And the base is Edison base or bayonet base, where no switch is needed.It is fairly easy to install and remove the lamp. Full automation of the lamp is fulfilled by receiving infrared signal and sound from man.
2.Functions
In the dark or dusk (ambient illuminace ≤1 lux), this light will turn on automatically if there is one walking or moving within its induction area, and keep on lighting for about 45 seconds after the effective moving or sound stops.
3.Advantages
Convenience (it can be installed like a light bulb and free from any switch), Energy Saving (Annual power consumption is less than 2 kilowatt-hours), long working life (it can be used for over 5 years on normal conditions), Safty (no heat dissipation nor radiation), high brightness(brightness can be equal to that of 25-W incandescent lamp).
4.Applications
It is Suitable for Corridor; Washing Room; Front Door; Cloak Room; Ware House Basement, Garage; all kinds of passageways, and so on. |
| |
| Item |
Specifications |
Value |
Unit |
| 1 |
AC Input Voltage
|
180∽260/50Hz
|
V AC |
| 2 |
Maximum Rated Power |
4 |
W |
| 3 |
Static Power Consumption |
0.1 |
m W |
| 4 |
Working Temperature |
≤50 |
Celsius |
| 5 |
Luminous Flux |
120 |
Lm |
| 6 |
Light Radiation Angle |
60∽160 |
Degree |
| 7 |
Ambient Illuminance |
≤1 |
Lux |
| 8 |
Lighting time of delay |
30∽60 |
S |
| 9 |
Induction Angle |
120 |
Degree |
| 10 |
Induction Distance |
5 |
meters |
| 11 |
|
|
|
| 12 |
|
Working Life(On and off 100 times per day and for 1 minute lighting each time)
|
|
>5 |
Year |
| 13 |
Discharge Rate of Battery(Time/times) |
1/60 |
Hour/time |
| 14 |
Dimension ( Diameter/ Length) |
65/95 |
Mm |
| 15 |
Weight |
60) |
g |
|
|
| |
Note:
1.Voltage of 80~130V AC/60Hz is also available if the lamp is specified as 110VAC. There is a tube connected to the lamp holder.
2.Use: Simply install the lamp to E27 or GU10 lamp holder.
Cautions:
When being installed, the LED induction light must be far away from heat or cold producers such as heater, air conditioner, microwave oven, and producers of electromagnetic field.
Make sure that the Induction window/Fresnel lens is not faced to windows or areas where air flow and light are great. Its induction distance may become shorter when the ambient temperature is higher than that of human body’s, and this is normal.
|
|
|
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
