The ECU-04 and ECU-05 12VDC and 24VDC, 100VAC to 240VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.
Features
- Microprocessor Automatically Mimics The Manual Start Procedure
- Simple Installation, Without Changing Original Wiring
- Easy to Set Up, low-cost, Small Size, Low Power Consumption
- For Use In Gasoline And Diesel Generators
- Three Attempts Multi-Start Function
- Circuits Are Protected With 94-V0 Epoxy
- Two Adjustable Time Delay Potentiometers
Specifications
| DC Supply |
12 VDC (ECU-XX-12V)
24 VDC (ECU-XX-24V) |
| Alternator Input Range |
Voltage 100 V ~ 240 VAC
Frequency 50~60 Hz |
| Ignition & Accessories Signal Output |
30Amp @ 12/24 VDC |
| Start Signal Output |
30Amp @ 12/24 VDC |
| Pre-Heat or Carburetor Signal Output |
30Amp @ 12/24 VDC |
| Auxiliary Signal Output |
20Amp @ 12/24 VDC |
| Time Delay Setting And Alarm Indicator |
- L1 : Remote Start Activated Indicator LED
- L2 : Generator Running Indicator LED
- L3 : Start Fail Indicator LED
- VR1 : Engine Pre-Heat Time Adjustment (1~25 sec.)
- VR2 : Starter Cranking Time Adjustment (1~25 sec.)
- SW : Function Selectable Switch
|
| Environment |
- Operation Temperature : -20~80 °C
- Relative Humidity : Maximum 95%
|
| Dimension |
150.0(L) x 100.0(W) x 31.0(H) mm |
| Weight |
380 gram |
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,