Description:
1.100 Ohm DIN Platinum RTDs with Class "A", 1/3 DIN and 1/10 DIN Accuracies
2.Temperature Range Varies with Cable Selection and Accuracy Class (See Description Below).
3.Available in Two Models:
Standard Closed End Sensor for Immersion Applcations
Air/Gas Measurement Sensors with Open Ends and Vent Holes.
4.Probes Available in 6mm, 3mm, 1/8" and 1/4" Diameters.
5.4-Wire Construction in 6 and 3 mm (1/4 and 1/8") Diameters
6.Both Models are Available As Straight Sheaths or With The Followng Mounting Threads: 1/8, 1/4, 3/8 and 1/2NPT, and 6mm, 8mm and 10mm Sizes
Ultra-Precise temperature sensors provide accuracies far tighter than most other RTDs on the market. Using DIN Platinum elements selected for Class A, Class 1/3DIN or Class 1/10DIN accuracy, along with superior materials and processes, Omega RTDs are among the most accurate industrial temperature sensors available.
These sensors are available in two styles:
1.Type P-M style closed ended immersion sensors for use where the sensors will be immersed in a fluid.
2.Type P-L style exposed element sensors for use in direct contact with air or gasses for more accurate measurement of these substances.
There are four probe diameters available including 3mm, 6mm, 1/8" and 1/4", with lengths starting at 50mm (2") with a number of standard lengths available (see ordering table below). A variety of mounting threads are available including: 6x1mm, 8x1mm, 10x1mm, 1/8NPT, 1/4NPT, 3/8NPT and 1/2NPT (Note: 6mm mounting threads are not available on 6mm diameter probes).
The ultimate temperature range of the sensor is dependent upon both the element accuracy and cable selection as shown below (the tightest temperature range applies):
Temperature Range Examples:
1.P-M-A-1/8-6-0-T-3 has a Class A Element = -100 to 450°C, and "T" (PFA) Cable = -100 to 250°C, resulting in a sensor temperature range of -100 TO 250°C.
2.P-M-1/10-1/4-9-1/2-P-3 has a 1/10DIN Element = 0 to 100°C, and a P (PVC) Cable = -29 to 100°C, resulting in a sensor temperature range of 0 to 100°C.
Accuracy Specifications:
Class A= ±(0.15 + 0.002 |t| )°C From -100 to 450°C
Class 1/3DIN = ±1/3 (0.3 + 0.005 |t| )°C From -50 to 250°C
Class 1/10DIN = ±1/10 (0.3 + 0.005 |t| )°C From 0 to 100°C
