Home > Products > Industrial Supplies > Electrical & Electronic Product Equipment

Cable Tray Systems

Unitech Cable trays and accessories from SFSP have been manufactured in compliance with BS 5750/BSEN
10130/BSEN 10131/ BSEN 10051 and NEMA standards.

A wide, precise range of products capable of providing the characteristics which respond to the proposed application, along with quality of assembly, speed of installation, and cost savings cable trays.

TYPES OF SIDE HEIGHTS

Straight                      (STR)

Return Flange Inside     (RFI)

Return Flange Outside   (RFO)

C-Type Inside              (CTI)

C-Type Outside          (CTO)

Technical Information

Types of Perforation
- Staggered

-           serial

Material Thickness
1.0, 1.25, 1.50 & 2.0 mm

Shape of Accessories
Cornered Curved 

Available Finishes 

Stainless Steel (SS)
Pre-Galvanized Steel (PG)
Hot dip Galvanized Steel (HG)
Electrolytic Galvanized Steel (EG)
Powder Coating (PC) 

Cable Tray Runs

HCT - Cable Trays
Thickness of sheet 1.5 mm
Stock length: 3000 mm / 2440 mm

LCT - Cable Trays
Thickness of sheet 1.0 mm
Stock length: 3000 mm / 2440 mm

MCT - Cable Trays
Thickness of sheet 1.25 mm
Stock length: 3000 mm / 2440 mm

VCT - Cable Trays
Thickness of sheet 2.0 mm
Stock length: 3000 mm / 2440 mm

Cable Ladder Systems

Cable Ladder of Unitech is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications. Cable ladder systems can provide significant advantages in cable fill over other wiring methods. This can provide savings in the size or number of raceways required thereby reducing both material and labor costs. Cable Ladders are available in a variety of finishes, and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring,
instrument and communications cable.

Rung Type and Dimensions
Rung Thicknesses:
1.5mm - 2.0 mm
Dimensions:
W = 41 mm
H  = 21 mm

Cable Trunking Systems

SFSP manufactures a full range of Unitech Cable Trunkings: Single and multi compartments with accessories according to the highest standards of fabrication. All these products are available with  various finishes applied in our factories to your demands.

Unitech Trunkings are available within variable thicknesses from 0.9 mm to 2 mm according to the specific project’s specifications and as per customers’ requests.

Several types of trunkings and fittings with accessories are presented in our catalogue. For additional information on installation, system design or fitting not shown in this publication, SFSP’s technical personnel are available to provide all assistance possible.

Materials

• Pre Galvanized : GI
• Hot-dip Galvanized : HD
• Black Steel : BL
• Powder Coated : PC
• Stainless Steel : SS

Compartments

• Single Compartment : S
• Double Compartment : D
• Triple Compartment : T

Thickness

• Sheet of 0.9 mm : 2
• Sheet of 1.2 mm : 3
• Sheet of 1.5 mm : 4
• Sheet of 2.0 mm : 5

Cable Support Systems

Beams

U- Support
Hole distance 75mm
U - Support
Thickness: 5.0 mm
length: 200-200mm

C - Channel
41 x 21 mm or B2B
41 x 41 mm or B2B
Thickness: 1.5, 2.0 & 2.5 mm
Length: 3 m