Product Description
Description:
The A series is developed especially to meet the high demand of the basis of the traditional formula, it has reached the best hardness and strong adhesive based on the original property, widely applied in the building and industrial field.
Applications:
1. Fixing and insulating of door and window frames.
2. Fill the joint between concrete and door, window.
3. Fill the joint between two walls.
4. Fill the joint among door, window, doorpost and suspended rolling door
5. Fill the joint between wall and floor as well as electrical wire and wall
6. Fill the gap among prefabricated parts
7. Fill the joint between rooftop and ceiling, between rooftop and wall, as well as rooftop and attic
8. Insulating electrical outlets and water pipes.
Characteristics:
1. Carrying and using conveniently: The raw material jet promptly and formed when open the valve of the can lightly,needless the foaming machine and the external power.
2. Environmental temperature wide-range application for use: The highest degree is 40oC and the lowest degree is 0oC, the products can work normally.
3. Measuring conveniently: The volume of the foam can controlled freely, the minimum can reach to 1ml. so it is helpful to small repairings.
4. Automatic expand: Owing to the expanding volume can reach to 50-70 times after jet the foam. So it can filling every comer sonly.
5. Humidity cure: The foam are reacting with the air or the moisture of the building materials promptly when jet, so it is unnecessary to add the curing agent or others.
6. Automatic adhesion: Needless processing of the surface, having good adhesion between the most of base materials, particularly the wet surface..
7. Small pressure of foaming: The volume of foam can expanding 20%~30% during it cure, so no damage to the base materials.
8. Wide application: Widely applied to the building and industry field and so on
Technical Data:
Volume:
|
900g/750ml
|
Density:
|
20~25kg/m3
|
Curing time:
|
1~3hours
|
Adhesive strength:
|
>100k/pa
|
|
>30k/pa
|
|
>120k/pa
|
|
>150k/pa
|
|
50~60%
|
Oxygen index:
|
22~25(normal)/28~32(flame-resistant)
|
Permeate water volume:
|
0.3~1(no epidermis)/<0.1(with epidermis)
|
Meet the standard:
JC 936-2004
Stroage and Shelf life:
12 months if stored in room temperature.
Caution:
1. Should be stored and transported in vertical position.
2. Should be kept at room temperature for at least 12 hours before the application.
3. Use before: See bottom of the can.
4. Harmful by inhalation. Lrritating to eyes, respiratory system and skin.
5. Do not breathe spray/vapour. Wear suitable protective clothing and gloves.
6. Use only in well-ventilated areas.
7. Pressurized container.
8. Keep away form direct sunlight and do not expose temperature over 50oC.
9. Do not pierce or bum, even after use. Keep away from sources of iginition, no smoking
10.Keep out of the reach of children.
Product Image
Img 1
Img 2
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,