Our product have the following prominent merit:
· Wave length
0.76~25μm
· Effective thermal efficiency using rate
86%
· Heating inertia
It will reach 50% rated power after closing circuit about 1-2 sec, and work in full power after closing circuit
about 2-4 sec; also, the temperature decrease are rapid.
· Rated power
30W---6000W, the single hole lamp may achieve above 6000W.
· Outer surface coating
Coating whole or part with the valuable heavy metal such as King, Titanium as well oxide such as Zirconium,
Aluminum, which can improve heating efficiency greatly.
· Lifetime
Below 2000W’s more than 5,000 hours if be used continuously;
Above 3000W’s more than 3,000 hours if be used continuously.
· Controlling
It to be made up servomechanism of the temperature with temperature controlling apparatus and booster.
· Specification
Power: 30W - 6000W
Voltage: 36V - 110V, 220V - 380V
Length: 60mm - 3000mm
· Wall thickness
1.0 mm, 1.2 mm, 1.50MM
· Shape
Single hole lamp, double holes lamp, round shape lamp, special shape lamp;
We can product or design all kinds of sharp needed.
· The infrared radiation characteristic of high energy and high density shorten the heating time as well the length
of the heating rough channels, and saves space of equipment occupy, which reduce investment cost on
equipment and workshop; at the same time, because of improving the using rate of effective thermal efficiency
greatly, it will save huge electricity used, and reduce producing cost.