| Model: | ws6912 |
|---|---|
| Brand: | ATE |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | satellite finder , s2 , satellite meter |
| Price: |
US $235
/ pc
|
| Min. Order: | 10 pc |
| Live Chat: | Last Online:19 Aug, 2016 |
DVB-S2 DIGITAL SATELLITE METER
SATELLITE METER & REAL TIME SPECTRUM ANALYZER
Main Function:
SYMBOL RATE 8PSK AND QPSK 3.5 Inch High definition TFT LCD Screen which Can show live Channels NEC Solution Shows both S/N and C/N
Shows strength and quality readings
Sound and Light Alarm When Lock Signal Shows channel picture
Show numerical reading and bar reading
Digital Meter for Signal Strength(in numerical & #118alue and picture)
Easy Satellite Manager ( EDIT, delete and SCAN)
Edit TP, Frequency, LNB switch, Symbol Rate etc.
Completely programmable by the user
Input Frequency 950-2150MHz
Input Level -65-25dBm
Input Impedance 75(ohm)
Auto Calculate Angle of AZ ,EL
Upgrade S/W by PC
Easy to carry, size only 9.5cm X 15.5cm X 4.5cm
DisEqC Control
22KHz Control
Fast Charge LI-ION Battery(1950mAh), Can Last 4 Hours Indicator Lights for 13/18 volts
Indicator lights for 22 KHz
USB port for software upgrades
USB software upgrade cable included Neck strap includes
Carrying case included
12VDC power charger included
For the first time in a economical digital meter, you are now able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter. Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade. Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence. Technical Parameter:
| System capabilities | Fully DVB compliant | Yes |
| LNB/Tuner input | Connector | F type,male |
| Frequency range | 950MHz-2150MHz | |
| Signal lever | -65dBm~-25dBm | |
| LNB supply | 13/18V,max400mA | |
| LNB switch control | 22KHz | |
| DiSEqC | Ver 1.0 /1.1/1.2 | |
| Demodulator | Front end | QPSK and 8PSK |
| Symbol rate | 2Mbps~45Mbps | |
| SCPC and MCPC Capable | Yes | |
| Spectral inversion | Auto conversion | |
| System resource | Processor | 32bit processor (200MHz) |
| SDRAM | 64Mbyte | |
| FLASH | 16Mbyte | |
| EEPROM | 8Kbyte | |
| Video decoder | MPEG 2 | Main Proflie@Main Level |
| Data Rate | up to 15M bits/s | |
| Resolution | 720*576,720*480 | |
| Video format | PAL/NTSC/SECAM | |
| MPEG Audio | MPEG 1 layer 1&2 | |
| Type | Mono | |
| Sampling rates | 32,44.1 and 48KHz | |
| Serial data interface | Connector | USB type |
| Power supply | Li-oN Battery | 1950 mA |
| Supply voltage | 12.6Volt | |
| charger | 90-240V | |
| Panel connectors | Digital tuner input | F type, male |
| Physical Specification | Size | 9.5x15.5x4.5 (cm) |
| Weight(Net) | 0.5 Kg |
