This product is the latest research in science and technology in Taiwan.Back out with automatic voice-activated function, the volume of ultra-compact, ultra-clear sound quality, ultra-long standby, simple operation, stable performance, easy installation can be features such as external control, plus a flashlight function.It can be used for remote monitoring, location tracking of the base station, home monitoring, car anti-theft tracking
2.Operation Guide
FlashlightPress picture switch when you want turn on or turn off.
Turn onOpen the back cover, insert the SIM card holder automatically boot, boot-up indicator light 5-8 seconds until the indicator light means the rear cover can be stamped out after the dial-up use.
Install:Please note that GSM network signal strength.Not install in the absence of signal or weak signal areas so that affect the use of the effect of lead it no can be used.
Number settings:Before writing code, please put the switch to manual place.Then put the switch in Write Phone Number place.And then phoned the host number, dialing the machine will automatically hang up a few seconds later.The opportunity to automatically back out number.No need answer at this time, put the switch in the normality location.At this time the number has been written into the host.As long as the detected sound to the set will automatically dial-up phone.
Voice function:Put switch in the sound control position, when you are not using voice-activated switch, please put the switch in the manual position.No matter if the outside sound with or without out, This is couldnt automatically back out, just only answer a call.
External control:This machine may contact with an external control (such as human infrared control, RF wireless control, magnetic, mobile, vibration control, plus a single-chip control, etc.).Support the external battery.
3.Notice
Please turn off the machine when charge.That will avoid damage the main machine.
Before use the machine, need to charge 6-8 hours before charging in order to achieve better results, charge to use the local distribution charger, so that not to damage the host.
Standby Time:3-5 working days for Voice control.6-15 working days for no use Voice control.30-40 hours for the flashlight.The Frequency is decided the standby time.
Light does not shine:Please check whether the battery power.
Not get through phone:Please check the SIM card is not plugged.Restart SIM card.
Non-automatic response:Restart SIM.Then turn on.
Confirmed if it GSM or not.This machine is GSM network.
Make sure the Signal is strong or not.The phone will check it.
Make sure if the switch in the normality place.Please put the switch place.
Non-automatic back out:Check the switch is in the sound control place.Put the switch in the sound control place.
Check if save telephone number.Restart write code.
Controller plus external control required.Order to see their own customer needs.
4.Product accessories:
1Main machine 1 set;
2Chargers 1 set
3USB fiber 1 set
Extensions:Back-up batteries, the demand for peripheral control line to buy another.
click for larger image
Img 1
Img 2
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
