The split pressurized solar water heater is composed of solar collector, storage tank, controller, working station and installation parts.
Working principle
* When the discrepant temperature of the solar collector and water tank reaches or not reaches the set value, the controller shall start or shut the circulation pump automatically.
* The circulation pump makes heat-conducting liquid (The heat-conducting liquid transfers heat to water by heat exchanger in the water tank) circulate automatically.
* In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device.
Product specification:
* Inner tank: Stainless steel (SUS304 2B)
Thickness: 2.0 mm
* Outer tank: Galvanization
Thickness: 0.3-0.5mm
* Insulating layer:polyurethane foam
Thickness: 55mm
Thermal transfer rate: 0.022W/m.K
* Highly efficient superconductive pipe
* The number of tube: 10, 12, 15, 18, 20, 24, 30, 36,50,60
* Water capacity: 100L-500L
* Optional Electric Booster: 1500w

Features:
1) Collector separated with the storage tank. The tank can be put anywhere of the house.
2) The collector can be put on both tilted roof, flat roof and ground.
3) Module design harmony with the building perfectly.
4) Intelligent control and automatic operation.
5) Anti-freeze: no water inside the tubes when it works.
6) The system controller has the anti-freezing function that the temperature circulation will operate while it reaches the fixed temperature.
7) Multifunction: Bathing, washing, domestic heating.
8) CE, ISO9001, 3C Certificate
Outer packing: Export Carton
The above specifications are only for reference, the system specifications will be designed according to the natural resources and the actual needs of the customer.
If you are interested in our products, please feel free to contact me!

 
Solar Key Mark and SRCC are on applying.

Frank is always at your service