DM500S is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader.
- 250 MHz IBM PowerPC Processor (350 Mips)
- 2 LED status
- Linux Operating System
- Full automatic service scan
- Supports directly bouquet-lists (indirect unlimited)
- Supports multiple LNB-Switching control (supports DiSEqC)
- 1 x Smartcard-Reader
- Unlimited channel lists for TV/Radio
- SPDI/F nterface for digital bit stream out (AC-3 / DTS)
- MPEG2 Hardware decoding
- Channel-change time < 1 second
- Fully adaptable OSD in many languages (skin-support)
- 100Mbit full duplex Ethernet Interface
- Supports EPG (electronic program guide)
- 1 x Scart-interfaces (fully controlled by software)
Video decoder:
- Video Compression MPEG-2 and MPEG-1 compatible
- Video Standard PAL and NTSC
- Video Formats 4:3 / 16:9
- Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
- Letterbox precolating for 4:3 TV-Device Audio decoder:
- Audiokompression MPEG-1 & MPEG-2 Layer I and II
- Audio Mode Dual (main/sub), Stereo
- Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video parameter:
- Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
- Teletext filter in conformity with ETS 300 472 Standard
- TV-Scart:
- Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:
- Frequency Range 950 .. 2150 MHz
- Signal Level - 65 dBm .. - 25 dBm
- Signal-to-Noise Level 12 dB max.
- DBS-Tuner Input Connector F-Type female
- Input Impedance 75 Ohm
- AFC +/- 3 MHz
- Demodulation Shaped QPSK
- Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
- FEC Viterbi and Reed-Solomon
- Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
- Roll-off Factor 35 %
- Demultiplexing according ISO 13818-1
Ethernet:
- 100 MBit compatible, bi-direktional interface
- Function Update of Firmware and Preprogramming
- LNB Power and polarisation:
- LNB Current 500mA max. ; short-circuit-proof
- LNB Voltage vertical < 14V without load, > 11,5V at 400mA
- LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
- LNB shut-off at Standby-Mode
- Count of active satellite position:
- DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
- DiSEqC - Rotor Control
Output digital:
- Output Level 0,5 Vss on 75 Ohm
- Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
- S/PDIF-Output optical (AC3)
Output analog:
- Output Level L/R 0,5 Vss on 600 Ohm
- THD > 60 dB (1 kHz)
- Crosstalk < -65 dB
Serielle Interface RS 232:
- Typ RS232 bidirectional
- Bit rate 115,2 kBit/s max.
- Plug Connector SUB-D-9
- Function Update of Firmware and Preprogramming
Power consumption:
- < 10W / 12V
Input voltage:
- DC12V,alternating acurrent +/- 15%
Extern power supply:
Input:
- 110-240V AC / 50-60Hz / 0,6A
Output:
- 12V = / 1A
Others:
- Ambient Temperature +15°C...+35°C
- Humidity < 80%
click for larger image
Img 1
Img 2
Img 3
Img 4
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,