|Origin:||Made In China|
|Category:||Industrial Supplies / Mining Machine|
|Label:||Hydraulic drill rig , blast hole rig , drilling rigs|
|Min. Order:||1 pc|
|Post Time:||10 Aug, 2009|
|Last Modified:||22 Sep, 2009|
|This Co. have total 3 Related Items||123Next|
|Place of Origin||China>>Hunan|
The DR series full hydraulic rotary blast hole drilling rig manufactured at POTENTIAL are designed to drill both the vertical and inclined blast holes of 250 to 700 mm in dia and up to 32 m in depth in dry, water-saturated, monolithic and jointed rocks with the hardness of 6 to 20.
1) Open P-shaped steel structure of the mast enables its easy servicing.
2) Squirrel cage variable frequency motor is installed on the rig swivel head.
3) Bore rods are made of tubes with 219 mm in dia. And 12 mm thread pitch.
4) Winch-type feed drive is equipped with "Rexroth" MP-1800A hydraulic motor to provide continuous bore rod feed.
5) Hydraulic cylinders are provided to arrest the mast during inclined drilling.
6) Comfortable operator's cab is provided.
|Drilling depth (m)||Single rig 19.8/multi rig 40|
|Drilling orientation (°)||60∼90°|
(or electric motor)
|Air compressor||107m3/min @ 1.4Mpa||84.9m3/min @ 0.7Mpa||74.6m3/min @ 0.76Mpa||53.8m3/min @ 0.75Mpa|
|Lifting capacity (KN)||320||245||250||155|
|Propulsion speed (mpm)||20||18||20||39|
|Lifting speed (mpm)||42||36||42||48|
|Gross weight (T)||180||136||105||99|
|Length(The drilling rig down)||21.5||20.7||20.2||19.7|
|Length(The drilling rig stand-up)||13.5||13.2||12.3||12|
|Total width (m)||5.25||5.25||4.95||4.95|