Home > Products > Electronics & Electricity > Transducer

In our pursuit to create drives optimized for variable speed needs in compact applications, the J1000 is the solution. This micro-drive is simple andreliable with even higher quality. Demand continues to increase for a compact shaft turner with hassle-free maintenance. Yaskawa drives haveearned a reputation for high performance, high functionality, and high quality.

Performance Features Ratings: 1/8 to 3 HP at 200-240 VAC 1-ph 1/8 to 5 HP at 200-240 VAC 3-ph 1/2 to 7.5 HP (ND) at 380-480 VAC 3-ph Overload Capacity: 150% for 60 sec. (Heavy Duty) 120% for 60 sec. (Normal Duty) Control Methods: V/f Control DC injection braking, ramp to stop Electronic reversing Adjustable accel/decel: 0.0 to 6000.0 seconds Controlled speed range: 40:1 Speed Regulation: ± 0.5 to 1% with slip compensation Displacement power factor: 0.98 Output frequency: 0 to 400 Hz Frequency resolution: 0.01 Hz with digital reference 0.06 / 60 Hz with analog reference Frequency accuracy: 0.01% with digital command 0.5% with analog command Volts / hertz ratio: infinitely adjustable pattern DC Injection braking: adjustable amplitude, duration, current limited Torque boost: full range, auto Power loss ride-thru: 0.5 sec. Speed search Auto restart 2 Critical frequency rejection settings Slip Compensation Protective Features Current limit, stall prevention during accel, decel, and run Motor and drive overload Over voltage prevention function Instantaneous over current Short circuit Under voltage Heatsink overheat Ground fault protection Over/under torque Short circuit current rating: 30KAIC RMS Options Dynamic Braking resistor (external) Remote LED Operator w/ copy function Modbus 232/422/485 Communications Analog Potentiometer Card DriveWizardTM Plus DIN rail mounting kit Y-Stick Copy Unit

Design Features 16-bit microprocessor logic Digital keypad operator, 5 digits LED status display Remote Mount Keypad Capability 5 multifunction digital inputs 1 multifunction digital output Programmable form C output contact for customer use: 1A at 250 VAC or 30 VDC 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN) Carrier frequency: 15 kHz max; swing PWM 8 multi-speed settings plus jog speed 1 Remote speed reference: 0-10 VDC (20 kohms) or isolated 4-20 mA (250 ohms) Signal follower: bias and gain Analog monitor output: 0-10 VDC proportional to output frequency or output current 133 parameters Cooling fan controlled by drive run/stop UL recognized electronic overload MTBF: 28 years Built-in Dynamic Braking Transistor Protected Chassis Side-by-Side mounting Maintenance monitors Service Conditions Ambient service temperature: -10° to 50°C (+14° to 122°F) Ambient storage temperature: -20° to 60°C (-4° to 140°F) Humidity: to 95% non-condensing Altitude: to 3300 ft; higher by derating Service factor: 1.0 Input voltage: -15% to +10% 200 to 240 VAC, 380 to 480 VAC Input frequency: +/-5%; 50/60 Hz Input phase sequence insensitive Standards UL 508C (Power Conversion) CSA 22.2 No. 14-95 (Industrial Control Equipment) UL, cUL listed; CE marked RoHS compliant EN 50178 (LVD) EN 50081-2, EN 50082-2 (EMC) EN 61800-3 IEC 529, 146 FCC CFR 47 Part 15 Subpart B (w/ External Filter)