The main motor drives main axle and every layer rotating by reducer. Dail drives numbers of rollers rolling and rotating in the ring by pintles.
Big materials are crushed into smaller particles by hammer crusher. Then they are sent to store house by elevator. The electro-magnetic vibrating feeder send the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials scatter to the side of the circle and fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and the third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.
The rotating turbine in the collector makes the coarse particles fall back for regrinding. The fine particles will come into the cyclone collector with the airflow and discharged by the discharging valve on the bottom of the collector. They are the final products. The airflow with little dust will be discharged through blower and muffler after being purified by the cyclone collector.

SCM Super-micro mill Specifications:

Model	SCM6015	SCM8021	SCM10027
Roller number	15	21	27
Diameter (mm)	Φ600	Φ800	Φ1000
Ring number(piece)	1×3	1×3	1×3
Main unit speed(mm)	235	235	173
Max. feeding size(mm)	10	10	20
Final size (mesh)	325-2500	325-2500	325-2500
Capacity (kg/h)	325-2500	600-4000	900-6800
Overall dimension (m)	10×2.3×5.5	13×3×5.8	18×4×8.6