1. LED fluorescent tube /led tube light /led lightings
2. smd3528 led or smd 3020 led
3. high brightness, low heat
4. CE&RoHS
5. Energy saving,long lifespan
LED Fluorescen Tube light
SMD3528 led
CE&RoHS approved
Energy saving led light
Long lifespan
high brightness, low heat.
|
Item
|
Model number
|
Description
|
Voltage
|
Power
|
Lumen
|
Color temperature
|
Lifespan
|
Beam angle
|
|
1
|
YJM-T8-96S-M6-10W-A/G
|
96pcs SMD 3528T LED
|
AC85-265V
|
10W±10%
|
153LM-210LM±10%
|
2800K-7500K
|
Over 50k hrs
|
120°
|
|
2
|
YJM-T10-144S-M6-10W-A/G
|
144pcs SMD 3528LED
|
AC85-265V
|
10W±10%
|
612LM-840LM±10%
|
2800K-7500K
|
Over 50k hrs
|
120°
|
|
3
|
YJM-T8-144S-1M2-16W-A/G
|
144pcs SMD 3528T LED(3020 LED Optional)
|
AC85-265V
|
16W±10%
|
1224LM-1684LM±10%
|
2800K-7500K
|
Over 50k hrs
|
120°
|
|
4
|
YJM-T8-168S-1M2-18W-G
|
168pcs SMD 3528LED (3020 LED Optional)
|
AC85-265V
|
18W±10%
|
820LM-1003LM±10%
|
2800K-7500K
|
Over 50k hrs
|
120°
|
|
5
|
YJM-T8-288S-1M2-20W-G
|
288pcs SMD 3528LED (3020 LED Optional)
|
AC85-265V
|
20W±10%
|
1504LM-1839LM±10%
|
2800K-7500K
|
Over 50k hrs
|
120°
|
Application:
1.Commercial lighting
2.Business office
3.Libraries, schools
4.Meeting room, supermarket
5.Corridors, home lighting etc.
Compare with Traditional fluorescent light:
LED Tube energy saving is over 80%, average lifespan is 10 times of traditional tube, no need starter and rectifier, so the LED Tube not need to be replaced frequency, maintenance free.
The total saved amount is equal to the cost of led tube after half an hour. LED light source is green environment LED, light pure and soft. Constant current driver. Drive fast, no strobe, No visual fatigue, protect etesight and physical health.
Environmental Protection-6-free low carbon green product (Mercury free, lead-free, no-ultraviolet ray and no-infrared, no-stroboscopic, noiseless )
Maintenance free-save the manpower and cost
Easy transportation-Aluminum and PC tube pipe, anti-compression and good vibration.
Installation:
1.Turn off the power
2.Remove the traditional fluorescent tube
3.Left up the cover of stand
4.Remove the starter and rectifier
5.Connect the two cables in the end of the stand, then connect each wire to AC
6.Cover the stand cover
7.Install the LED Tube
8.Turn on the power
|
click for larger image
Img 1
Img 2
Img 3
Img 4
Img 5
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,