Home > Products > Industrial Supplies > Electrical & Electronic Product Equipment

diesel generator set specification:

• Genset features:
  • Prime power: 400kw/500kVA
  • Voltage: 230/400V (adjustable)
  • Power factor: 0.8 (lagging)
  • Connect type: three-phase and four-wire
  • Insulation class: H/H
  • Protection grade: IP21-23
• Engine features:
  • Engine brand: cummins
  • Engine type: in-line four-cycle and water cooled
  • Turbocharged and inter-cooler
  • Combustion type: direct injection
• Standard accessories:
  • Standard control panel, exhaust silencer, flexible pipe, battery and battery cables, battery rack, operation manual and document
• Optional accessories:
  • Intelligence control panel, paralleled control panel, automatic transfer switch (ATS) panel,
  • automatic remote control panel, oil-water separator, intelligent battery charger, sound-resistant canopy, weather-resistant canopy, fuel tank and trailer

  INSPECTION AND TEST

  1 GENERAL

  1.1 Each engine shall be tested at manufacturers workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.

  1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.

  1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchasers satisfaction and tests shall be repeated.

  1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.

  1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.

  1.6 The completed and individually tested engine and generator shall be assembled onto the baseplate with all auxiliaries, instruments and controls for a complete test of the generator set.

   

   

  Why Cummins powered gensets?

  1. Cummins engines which are made in China with the same standard of the US Cummins keep the quality almost the same as the US Cummins.

  2. More than 90% of the Engines components and spares are made in China which keeps the cost much lower.

  3. Cummins engines are universally just as Cummins factories all around the world; all the spares are universal which make the maintenance and reparation very simple.

  4. Cummins has worldwide after-sales network, to whom you can get technical support and spares right near your house.

  5. Engineers are more familiar with Cummins engines because they are most wildly use in every filed and everywhere around the world.