Home > Products > Electronics & Electricity > Other Electrical & Electronic

solar charge controller 1solar charge controller 2solar charge controller 3
  • solar charge controller 1
  • solar charge controller 2
  • solar charge controller 3

solar charge controller

Model:LAX12
Brand:LAX
Origin:Made In China
Category:Electronics & Electricity / Other Electrical & Electronic
Label:solar controller , solar regulator
Price: -
Min. Order:-
Inquire Now Add to Basket

Member Information

Detail

shenzhen kingsun new energy co., ltd.

Free MemberGuang Dong - China
Live Chat:Last Online:30 Jan, 2013

Product Description

The product can automatically manage the work of Solar Panel and battery in Solar System, which is below 120W (12V) or below 240W (24V).
FUNCTION:
1. over-load protection                 2.short circuit protection              
3.reverse discharging protection        4.reverse-polarity protection             
5.protection from the lightning strike.
6.under-voltage protection              7.over-charging protection
II. CONNECTION (AS INDICATED IN DIAGRAM):
Open the top cover of controller; connect the wire and terminals of controller according to the drawing on the top cover of controller.
1. Connect the “+”, “- ” Poles of the battery to the correct ports of controller (the third and the fourth one from left).
*If load indicator (mark: load) flickers once and starts lighting after 30 seconds, you can tell the connection is correct; the following operation can be proceed, otherwise, the following operation may damage the controller.
2. Connect the “+”, “- ” Poles of the solar panel to the correct ports of controller (the first and the second one from left).
*Incorrect connection may damage.
3. Connect the “+”, “-” Poles of the load to the correct ports of controller (the fifth and the sixth one from left).
III. INDICATOR LED
              1. The battery is being charged strongly when the Charge LED is lighting; flickering means the battery is in floating charge mode, if it’s off means charging stopped.
              2. When the Load LED is lighting, it means there is output and load can work; if it’s off, there isn’t output and the load cannot work.
Notice:
              1. Please make sure the rated voltage of solar panels, batteries the loads are same and are all 12V or all 24V.
              2. The rated current of solar panels and load must be less than the rated current of controller.
The Specifications:
Rated voltage
12V or 24V
Voltage of stop power supply
*10.8V or 21.6V
Rated charging current
10A
Voltage of resume power supply
*11.8V or 23.6V
Rated load current
10A
Voltage of stop charging
*14V or 28V
Working temperature
-20 ~ +60
Temperature coefficient of voltage stop charge
-3mV//cell
Dimension (L*W*H)
101×95×35 mm
Net weight
120g

Payment Terms:TT

Product Image

solar charge controller 1
Img 1
solar charge controller 2
Img 2
solar charge controller 3
Img 3

Send Inquiry to this Member

shenzhen kingsun new energy co., ltd.

3F,tongfu building, the sixth road of xinan,jingbei,xixiang town,baoan district, shenzhen, china

Phone:
86-0755-36941123
Fax:
86-0755-83305103
Contact:
julie (sales manager)
Mobile:
013760312046

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Electrical & Electronic Made In China Products

,  

Other Electrical & Electronic China Suppliers and China Manufacturers