| Model: | XCW220 |
|---|---|
| Brand: | CW |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electric Control System |
| Label: | stepper motor driver , step motors driver , step motor driver |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:27 Feb, 2016 |
| XCW220 Type Driver Module
◇Applicable voltage range (20～40VDC) ◇Adopt constant-current chopped wave and ambipolar full-bridge driver. ◇Excellent operating characteristic ◇Automatic semi-flow locking ◇High reliability ◇Adapt to two-phase and four-phase mixing step motor below 2A. Technical Data: (Specifications) 1. Input Voltage: 20～30VDC single voltage power supply 2. Current: current of this module is 0.4A. 3. Driver Type: Full-bridge Driver 4. Operating Mode: 1/8 5. Protecting Type: overheating protection and lock automatic semi-flow 6. Overall Dimension: 100mm×61mm×19mm 7. Weight: <300g 8.Operating Environment: temperature-15～40℃ and humidity<90% |
 |
| Connecting Terminal: (I/O PORTS)
1. VCC: Power supply 20~30VDC Remarks: avoid exceeding 35V by all means, for fear damage of module. 2. GND: VCC power supply corresponding ground wire 3. B+: Step motor one-phase wire package 4. B-: 5. A+: Step motor other one-phase wire package 6. A-: 7. CP IN+: Clock pulse input terminal, light coupling input terminal and effective rising edge 8. CP IN-: Light coupling input negative terminal 9. CW/CCW+: Motor operating direction control and light coupling input terminal 10. CW/CCW-: Light coupling input negative terminal |
 |
| Cautions:
1. Motor Connecting: this driver module applies to two-phase and four-phase mixing step motor with rated current of 0.4A. Please note that motor wire shouldn't be connected wrongly, otherwise driver module will be burnt out. Connection diagram is as follows: 2. Avoid contacting corrosive gas. |
 |
