Features as follows：
⑴ Spike without air vented：material：ABS
⑵ Spike protective cap：material：PP
⑶ Purple drip chamber：material：PVC； specification：72mm
⑷ Infusion filter：mesh material: medical grade PA6-6; Plastic frame: ABS；Its specification：15.3×3.7mm；
wire diameter of monofilament：48μm；pore size：15+3/-2μm；Filtration rate：85%
⑸ Flow rate：For the infusion set with 20drops/ml,The filter shall deliver no less than 1000ml of sodium chloride(Quality thickness Nacl=9g/l) at(23±2)℃ in 10mins with a pressure difference of 10kPa
⑹ Tube length：1.50m,I.D.:3.0mm,O.D.:4.1mm；the length of short tubing：200mm
⑺ Y connector：Caltrop heat sealing type, latex-free
⑻ Roller clamp：Specification：57mm material：ABS the pathway can be hung by this design
⑼ Male luer lock connector：material：ABS with 6% luer lock taper conforming to international standard
⑽ Hypodermic needle：OD：0.80mm；specification：21G，green；(as per your specific requirements)
Options Available：
- With or without air vented spike
- With or without “Y” injection port(Latex or Latex-free)
- With Roller clamp： 48mm、45mm available
- 5 kinds of Luer lock or 2 kinds of luer slip available
Packaging：Paper Plastic Pouch or PE package
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
