+ UV-A intensity mW/cm² + UV-A dose mJ/cm²
+ UV-B intensity mW/cm² + UV-B dose mJ/cm²
+ UV-C intensity mW/cm² + UV-C dose mJ/cm²
+ *UV-V intensity mW/cm² + UV-V dose mJ/cm²
+ Full UV intensity mW/cm² + Full UV dose mJ/cm²
+ temperature measuring °C / °F
+ big colour graphic display
+ numerical and graphical display
+ permanent or „triggered“ measuring mode*
+ SD Memory Card
+ real-time clock
+ graphic chart on computer
+ re-chargeable accu cells with charger
The UV-1360 Colour SD Radiometer + Dosimeter RE is a self-contained, high quality UV measuring instrument. It is designed to measure and record UV intensity and UV dosage in the UV curing process. Measuring results are indicated both, graphically and numerically on a big colour display.
With these three different UV-bands plus the temperature sensor most of the measuring requirements of UV curing applications can be covered.
Due to its three different UV sensors and the integrated microprocessor the UV-1360 Colour SD Radiometer + Dosimeter REcan measure, record and display the peak of the UV-intensity (mW/cm2) for each UV-band individually plus the peak of total UV energy.
Additionally, this instrument is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated for each UV-band (UV-A, UV-B, UV-C or UV-V*) individually and as total Integral of UV-dosage over the full UV-range. This allows to determine not only the total energy, but also how that energy is delivered, i.e., what intensity and dose at what UV-band.
*This instrument features a selectable „triggered mode“, i.e. the 30 sec recording cycle starts within a 120 second readiness phase not before the incident UV-intensity exceeds 2 mW/cm².
Additionally it is equipped with an extra sensor for measuring temperatures from 0 to 230° F / 0 to 110° C.
The four sensors are on the back of the unit which also serves as a heat shield. After completion of the measuring cycle the measuring results are instantly displayed numerically and graphically auto-scaled on the built in 45 x 34 mm (2 1/2”) TFT colour display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life.
This Radiometer + Dosimeter is equipped with an SD-Memory Card Slot and an evaluation software for downloading the data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic charts (mW/cm2) and (mJ/cm2)
