Professional Amplifier, Audio Amplifier, Power Amplifier, PA Amplifier, Pro Amplifier, Professional Power Amplifier, Karaoke Power Amplifier, Karaoke Audio Amplifier, KTV Equipment, Pro Sound, PA System, Pro Power Amplifier, PA Power Amplifier.
1) Minimum power-to-weight ratio
2) Minimum power-to-volume ratio
3) Zero heat insulation cooling system
4) Segmented analysis on system temperature
5) Transistors line-up at zero thermal path difference
6) Cumulative analysis on high frequency power
7) Accurate power dispatching
8) Real-time / Online detecting of load resistance
9) Dynamic adjusting and analysis on the integrated output
10) Complete 2-channel, 2U amplifier series
11) Maximum output power up to 1500W@8ohms
12) Refined SMD production technology
13) All-round circuit soft protection without anintemal circuit break
14) S/N ratio more than 110dB even higher
15) High damper factor over 1500
16) High slew rate as high as 100v/us
17) 1 ohm parallel, low impedance loading
PA06 Lightweight Power Amplifier
|
| 8Ω Stereo Power(RMS) |
2 × 600W |
| 4Ω Stereo Power(RMS) |
2 × 900W |
| 2Ω Stereo Power(RMS) |
2 × 1200W |
| 8Ω Bridged Power(RMS) |
1800W |
| 4Ω Bridged Power(RMS) |
2400W |
| 2Ω Parallel Power(RMS) |
1800W |
| 1Ω Parallel Power(RMS) |
2400W |
| Frequency Response(+o/-0.3dB,1W/8Ω) |
20Hz-20kHz,-3dB@135kHz |
| Phase Response ( at rated power 20Hz-20kHz) |
<+/-8 degree |
| THD+N (at rated power 1kHz 1W ) |
<0.025% |
| SMPTE IMD (rated power. 60 Hz/7kHz-1/4) |
<0.075% |
| Damping Factor ( at rated power 63Hz) |
>1500 |
| Controlled Slew Rate ( 1kHz tone burst 40dB gain) |
>-100v/us |
| Voltage Gain ( 0.775V/0dBm ) |
X89 |
| Input Sensitivity ( X40/36dB ) |
1.73V |
| S/N Ratio ("A"weighted, 1kHz, 1V input ) |
>110dB |
| Max Output Voltage(40millisecond tone burst) |
122V |
| Power Current Draw (typical music) |
750VA/3.3A |
| Power Current Draw (over loading) |
1500VA/6.5A |
| Input Connectors (per channel) |
Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
| Output Connectors (per channel) |
5-way binding posts or Speakon connectors (market dependent) |
| Power Supply (factory configured) |
AC220V/230V,50-60Hz |
| LED Indicators (per channel) |
Signal, Protect, Active, Critical |
| Construction |
Steel chassis, 16 gauge . Casting Aluminum front |
| Dimension |
88X482X400mm |
| Net Weight |
16.3kg |
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
